EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric Optimization of Friction Stir Welded AA 2014 Al-Alloy Joints by Taguchi-Based Computing Techniques

M. S. Srinivasa Rao, R. Venkateswara Rao, S. Anil Kumar, B. Praveen, S. Rajkumar

Boletim da Sociedade Paranaense de Matemática · 30.07.2026 · 44 (8) · 1-12

DOI: 10.5269/bspm.83956 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Boletim da Sociedade Paranaense de Matemática, online erschienen am 30.07.2026. Verfasst von M. S. Srinivasa Rao und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, lightweight aluminum alloys are best suited to various engineering applications. The medium-strength AA2014 Al alloys are highly encouraged for present and upcoming engineering applications. The work focused on the development of AA 2014 Al-alloy joints by using emerged solid-state technique called friction stir welding (FSW). The joints were produced with a rotational speed of 800–1000–1200 rpm, traverse speeds of 40–60–80 mm/min and tool tilt angle of 1− 2–3^0 degrees and a square pin profile. The L9 orthogonal array was used in the design of the experiments which had three parameters at three levels. Regression equations and analysis of variance (ANOVA) which measures the percentage contribution of each parameter to responses serve as the foundation for the mathematical model. The signal to noise (S/N) ratio and experiment outcomes were compared with the ideal conditions for ultimate tensile strength (UTS), yield strength (YS) and hardness Vickers (HV) responses. The signal to noise ratio matched the superior results of the welds made with square profile and processed at 1000 rpm.

Zitieren

APA

Rao, M. S. S., Rao, R. V., Kumar, S. A., Praveen, B., & Rajkumar, S. (2026). Parametric Optimization of Friction Stir Welded AA 2014 Al-Alloy Joints by Taguchi-Based Computing Techniques. Boletim da Sociedade Paranaense de Matemática, 44(8), 1-12. https://doi.org/10.5269/bspm.83956

Vancouver

Rao MSS, Rao RV, Kumar SA, Praveen B, Rajkumar S. Parametric Optimization of Friction Stir Welded AA 2014 Al-Alloy Joints by Taguchi-Based Computing Techniques. Boletim da Sociedade Paranaense de Matemática. 2026;44(8):1-12. doi:10.5269/bspm.83956

BibTeX
@article{Rao2026,
  author = {Rao, M. S. Srinivasa and Rao, R. Venkateswara and Kumar, S. Anil and Praveen, B. and Rajkumar, S.},
  title = {Parametric Optimization of Friction Stir Welded AA 2014 Al-Alloy Joints by Taguchi-Based Computing Techniques},
  journal = {Boletim da Sociedade Paranaense de Matemática},
  year = {2026},
  volume = {44},
  number = {8},
  pages = {1--12},
  doi = {10.5269/bspm.83956}
}
Kostenlos starten →