CFD Based Simulations for Thermal Management of Lithium-Ion Cell Using Phase Change Material
Boletim da Sociedade Paranaense de Matemática · 27.10.2026 · 44 · 1-14
DOI: 10.5269/bspm.81016 ↗Kurz gefasst
Fachartikel in der Zeitschrift Boletim da Sociedade Paranaense de Matemática, online erschienen am 27.10.2026. Verfasst von Muhammad Zahid und 1 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the current manuscript, we have investigated the effect of metallic enclosure on the melting behavior of PCM for the thermal management of lithium-ion cell. For this, two enclosure configurations, the 0-fin and fin-enhanced enclosures are considered. The 0-fin enclosure surrounds the RT-27 PCM which is mounted around the cell. The fin-enhanced enclosures incorporate 2 to 5 circular fins on the inner side of the enclosure, uniformly distributed along the axial direction. The fins are embedded into the PCM and extend toward the cell to enhance heat transfer from the cell to the PCM. The top and bottom boundaries are insulated to examine the melting behavior of the PCM. An internal heat generation rate $q'''=29883~\mathrm{W/m^3}$ corresponding to a 1C load is applied to the lithium-ion cell. Transient simulations are performed for all configurations until the complete melting of the PCM. The results demonstrate the significance of uniformly distributed fins in improving heat distribution within the PCM and maintaining lower temperature, thereby reducing risk of cell deformation or damage. The simulations results reveal that there is a rise in cell temperature of approximately up to 4 K (or $^\circ$C) in first 300 $s$. The rise in temperature during the next 300 $s$ remains lower than 0.8 K (for 0-fin model) showing the effect of PCM only and that is approximately 0.44 K (for fin-enhanced model) showing the combined effect of PCM and 5-fin model. The PCM melts completely in 2337 $s$ and 2120 $s$ for 0-fin model and the 5-fin model respectively. The simulations are performed using ANSYS Workbench with Fluent, employing the energy and melting/solidification models.
Zitieren
APA
Zahid, M., & Ilyas, A. (2026). CFD Based Simulations for Thermal Management of Lithium-Ion Cell Using Phase Change Material. Boletim da Sociedade Paranaense de Matemática, 44, 1-14. https://doi.org/10.5269/bspm.81016
Vancouver
Zahid M, Ilyas A. CFD Based Simulations for Thermal Management of Lithium-Ion Cell Using Phase Change Material. Boletim da Sociedade Paranaense de Matemática. 2026;44:1-14. doi:10.5269/bspm.81016
BibTeX
@article{Zahid2026,
author = {Zahid, Muhammad and Ilyas, Annie},
title = {CFD Based Simulations for Thermal Management of Lithium-Ion Cell Using Phase Change Material},
journal = {Boletim da Sociedade Paranaense de Matemática},
year = {2026},
volume = {44},
pages = {1--14},
doi = {10.5269/bspm.81016}
}
EUVIMED