A Study on the Performance of Photovoltaic Thermal Collector Using Various Porous Materials
Journal of Energy and Sustainable Environment · 27.10.2026 · 1 (1)
DOI: 10.52650/btf85n25 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy and Sustainable Environment, online erschienen am 27.10.2026. Verfasst von Muhammad Afham Rabbani Ab Rashid und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Photovoltaic thermal (PVT) collectors are facing the risk of overheating when being exposed to surplus sunlight radiation which then reduces its efficiency. Therefore, this paper aims to determine which type of porous materials is ideal to be integrated with PVT system to improve its heat transfer and solar panel efficiency. To achieve this goal, an experiment which involves several porous materials – wood, silica aerogel, polyethylene foam, and coconut fibre, has been conducted to observe the performance of each case. The experimental results are also being validated by the numerical simulation using ANSYS Fluent with the same parameters. The results presented in this paper involve several criteria where each of the porous materials has distinct advantages in certain cases. Polyethylene foam generates a high value for output voltage of 13.8 V while maintaining the lowest temperature difference across the surface of PV cells which is 0.4°C. Wood on the other hand shows an outstanding performance on the rate of heat transfer at 7.8351 W compared to other materials. Silica aerogel and coconut fibre both have a significant rise in heat transfer efficiency at 38.74 % and 30.81 % respectively compared to a case with absence of porous material which only has 0.03 % heat transfer efficiency. Simulation results show that polyethylene foam has a consistent performance for all cases making it the most ideal material to be integrated with PVT collector. The highest percentage error of the experimental results compared to the analytical data is only 22.97 %.
Zitieren
APA
Rashid, M. A. R. A., Karim, M. H. A., Khairudin, A. R. M., Selamat, F. E. B., & Faizal, N. B. B. M. (2026). A Study on the Performance of Photovoltaic Thermal Collector Using Various Porous Materials. Journal of Energy and Sustainable Environment, 1(1). https://doi.org/10.52650/btf85n25
Vancouver
Rashid MARA, Karim MHA, Khairudin ARM, Selamat FEB, Faizal NBBM. A Study on the Performance of Photovoltaic Thermal Collector Using Various Porous Materials. Journal of Energy and Sustainable Environment. 2026;1(1). doi:10.52650/btf85n25
BibTeX
@article{Rashid2026,
author = {Rashid, Muhammad Afham Rabbani Ab and Karim, Muhammad Hanif Abdul and Khairudin, Ahmad Rafiq Mohd and Selamat, Farah Elida binti and Faizal, Nur Batrisyia binti Mohamed},
title = {A Study on the Performance of Photovoltaic Thermal Collector Using Various Porous Materials},
journal = {Journal of Energy and Sustainable Environment},
year = {2026},
volume = {1},
number = {1},
doi = {10.52650/btf85n25}
}
EUVIMED