PROCEDURE FOR ESTIMATING OIL THREE-DIMENSIONAL SOLUBILITY PARAMETERS
Rubber Chemistry and Technology · 2017 · 90 (4) · 621-632
DOI: 10.5254/rct.82.83733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rubber Chemistry and Technology, 2017. Verfasst von Brent K. Larson und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 9 Literaturangaben.
Abstract (Originalsprache)
Process oils make important contributions to nearly every compound in a tire, and oil–polymer interactions have effects on compound processing and performance. One way to predict oil–polymer interactions is to determine the three-dimensional (3-D) Hansen solubility parameters (HSPs) for both oil and polymer, and the polymer solubility sphere (PSS) radius. Favorable oil–polymer interactions occur when an oil's HSPs are located within a PSS. Interactions are stronger when an oil's HSPs are located closer to the center of the PSS. If an oil's HSPs are located outside a polymer's solubility sphere, then the polymer is not soluble in the oil as a result of insufficient favorable interactions. A polymer characterization technique for determining the HSPs is the bitumen solubility model. However, no simple procedure has previously been documented for estimating the 3-D HSPs for an oil. A labor-intensive method has been described by Levin and Redelius. The oil solubility parameters estimation procedure (OSPEP) has been developed to meet the need for a relatively simple characterization technique. This procedure can provide an estimation of oil HSPs by running two titrations and a dynamic scanning calorimetry test. Analysis involves an iterative procedure to estimate the three HSPs for the oil. OSPEP represents a step forward to easily obtain insight into oil–polymer interactions.
Zitieren
APA
Larson, B. K., Hess, J. M., & Williams, J. M. (2017). PROCEDURE FOR ESTIMATING OIL THREE-DIMENSIONAL SOLUBILITY PARAMETERS. Rubber Chemistry and Technology, 90(4), 621-632. https://doi.org/10.5254/rct.82.83733
Vancouver
Larson BK, Hess JM, Williams JM. PROCEDURE FOR ESTIMATING OIL THREE-DIMENSIONAL SOLUBILITY PARAMETERS. Rubber Chemistry and Technology. 2017;90(4):621-632. doi:10.5254/rct.82.83733
BibTeX
@article{Larson2017,
author = {Larson, Brent K. and Hess, Julie M. and Williams, Jeffrey M.},
title = {PROCEDURE FOR ESTIMATING OIL THREE-DIMENSIONAL SOLUBILITY PARAMETERS},
journal = {Rubber Chemistry and Technology},
year = {2017},
volume = {90},
number = {4},
pages = {621--632},
doi = {10.5254/rct.82.83733}
}
EUVIMED