ELASTOMER-ASSISTED POLY(ETHYLENE OXIDE) ELECTROLYTES: ENR50 SUPPRESSES CRYSTALLINITY AND BOOSTS Na+ TRANSPORT ENABLING HIGH-VOLTAGE SOLID-STATE SODIUM-ION BATTERIES
Rubber Chemistry and Technology · 2026-06 · 99 (2) · 165-178
DOI: 10.5254/rct.25.00057 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rubber Chemistry and Technology, 2026-06. Verfasst von Kai Ling Chai und 7 weiteren Autor:innen. Die Arbeit nennt 122 Literaturangaben.
Abstract (Originalsprache)
The quest for sustainable, greener, low-cost energy storage has propelled solid-state sodium-ion batteries as a vital alternative to lithium-based systems. A solid polymer electrolyte (SPE) comprising a poly(ethylene oxide) (PEO) and 50% epoxidized NR (ENR50) blend doped with NaCF 3 SO 3 was investigated. Incorporation of the biobased ENR50 elastomer improves flexibility and promotes ion transport by suppressing PEO crystallinity and enhancing amorphous conduction pathways. An optimal salt loading of 25 wt% NaCF 3 SO 3 delivered the highest room temperature ionic conductivity of 1.00 × 10 −5 S cm −1 . Temperature-dependent conductivity followed Arrhenius behavior, with two distinct regions at 30–60 °C ( E a1 = 1.27 eV) and 60–100 °C ( E a2 = 0.19 eV; σ 2 = 8.57 × 10 −2 S cm −1 ), suggesting a temperature-driven structural transition. Differential scanning calorimetry confirmed a semicrystalline-to-amorphous transition with a melting temperature event at ∼60 ± 10 °C, consistent with the observed increase in ionic mobility. Compared with lithium analog (PEO-ENR50-LiCF 3 SO 3 ), the sodium-based system exhibited improved electrochemical performance, achieving a higher sodium-ion transference number (0.23) than the lithium-ion transference number (0.06). Both systems showed dominant ionic conduction, with total ion transport numbers approaching 0.99. Attenuated total reflectance Fourier transform infrared spectroscopy confirmed polymer–salt coordination at the PEO ether group (∼1099 cm −1 ), whereas thermogravimetric analysis demonstrated improved thermal stability upon salt incorporation. Linear sweep voltammetry revealed a wide electrochemical stability window up to 5.0 V. Overall, these results demonstrate the synergistic role of ENR50 in combining mechanical compliance with improved ionic transport, highlighting its potential as a high-voltage SPE for next-generation sodium-ion batteries.
Zitieren
APA
Chai, K. L., Nizam, N. S. A., Heah, W. Y., Loh, K. S., Su’ait, M. S., Noor, S. A. M., Ahmad, A., & Lee, T. K. (2026). ELASTOMER-ASSISTED POLY(ETHYLENE OXIDE) ELECTROLYTES: ENR50 SUPPRESSES CRYSTALLINITY AND BOOSTS Na+ TRANSPORT ENABLING HIGH-VOLTAGE SOLID-STATE SODIUM-ION BATTERIES. Rubber Chemistry and Technology, 99(2), 165-178. https://doi.org/10.5254/rct.25.00057
Vancouver
Chai KL, Nizam NSA, Heah WY, Loh KS, Su’ait MS, Noor SAM, et al. ELASTOMER-ASSISTED POLY(ETHYLENE OXIDE) ELECTROLYTES: ENR50 SUPPRESSES CRYSTALLINITY AND BOOSTS Na+ TRANSPORT ENABLING HIGH-VOLTAGE SOLID-STATE SODIUM-ION BATTERIES. Rubber Chemistry and Technology. 2026;99(2):165-178. doi:10.5254/rct.25.00057
BibTeX
@article{Chai2026,
author = {Chai, Kai Ling and Nizam, N. S. A. and Heah, Wey Yih and Loh, K. S. and Su’ait, Mohd Sukor and Noor, S. A. M. and Ahmad, Azizan and Lee, Tian Khoon},
title = {ELASTOMER-ASSISTED POLY(ETHYLENE OXIDE) ELECTROLYTES: ENR50 SUPPRESSES CRYSTALLINITY AND BOOSTS Na+ TRANSPORT ENABLING HIGH-VOLTAGE SOLID-STATE SODIUM-ION BATTERIES},
journal = {Rubber Chemistry and Technology},
year = {2026},
volume = {99},
number = {2},
pages = {165--178},
doi = {10.5254/rct.25.00057}
}
EUVIMED