EUVIMEDEUVIMED entdecken
Crossref

INTERPRETATION OF THE TANδ PEAK HEIGHT FOR PARTICLE-FILLED RUBBER AND POLYMER NANOCOMPOSITES WITH RELEVANCE TO TIRE TREAD PERFORMANCE BALANCE

Nuthathai Warasitthinon, Christopher G. Robertson

Rubber Chemistry and Technology · 2018 · 91 (3) · 577-594

DOI: 10.5254/rct.18.82608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rubber Chemistry and Technology, 2018. Verfasst von Nuthathai Warasitthinon und 1 weiteren Autor:innen. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this research is to clarify the meaning of the peak height for the viscoelastic loss tangent (tanδ) in the glass transition region of particle-filled rubber, polymer nanocomposites, and polymer systems in general. Filler, oil, and curative loadings were systematically varied in a model styrene-butadiene rubber formulation with carbon black as the reinforcing filler. The dynamic mechanical responses of these compounds enabled a detailed study of the glass-to-rubber softening transition, which is known to play an important role with respect to the balance of traction, handling, and rolling resistance characteristics of tire treads. From the temperature-dependent viscoelastic results that were acquired at fixed frequency and small dynamic strain, it was demonstrated that a higher peak value for tanδ was correlated with a lower dynamic modulus in the rubbery state. Adjusting filler volume fraction was found to be an effective way of changing the rubbery modulus and hence the tanδ peak height. It was furthermore verified that such a correlation is a universal material-independent viscoelastic effect by mathematically producing a similar trend by varying the rubbery modulus parameter in the Havriliak–Negami viscoelastic model. This investigation also showed why glass transition temperature should be determined from the position of the loss modulus peak and not the tanδ peak. Cure behavior, tensile stress–strain properties, and extent of filler networking (Payne effect) for these rubber compounds will additionally be discussed.

Zitieren

APA

Warasitthinon, N., & Robertson, C. G. (2018). INTERPRETATION OF THE TANδ PEAK HEIGHT FOR PARTICLE-FILLED RUBBER AND POLYMER NANOCOMPOSITES WITH RELEVANCE TO TIRE TREAD PERFORMANCE BALANCE. Rubber Chemistry and Technology, 91(3), 577-594. https://doi.org/10.5254/rct.18.82608

Vancouver

Warasitthinon N, Robertson CG. INTERPRETATION OF THE TANδ PEAK HEIGHT FOR PARTICLE-FILLED RUBBER AND POLYMER NANOCOMPOSITES WITH RELEVANCE TO TIRE TREAD PERFORMANCE BALANCE. Rubber Chemistry and Technology. 2018;91(3):577-594. doi:10.5254/rct.18.82608

BibTeX
@article{Warasitthinon2018,
  author = {Warasitthinon, Nuthathai and Robertson, Christopher G.},
  title = {INTERPRETATION OF THE TANδ PEAK HEIGHT FOR PARTICLE-FILLED RUBBER AND POLYMER NANOCOMPOSITES WITH RELEVANCE TO TIRE TREAD PERFORMANCE BALANCE},
  journal = {Rubber Chemistry and Technology},
  year = {2018},
  volume = {91},
  number = {3},
  pages = {577--594},
  doi = {10.5254/rct.18.82608}
}
Kostenlos starten →