EUVIMEDEUVIMED entdecken
Crossref

ENHANCEMENT OF ELECTRICAL CONDUCTIVITY AND FILLER DISPERSION OF CARBON NANOTUBE FILLED NATURAL RUBBER COMPOSITES BY LATEX MIXING AND IN SITU SILANIZATION

Yeampon Nakaramontri, Charoen Nakason, Claudia Kummerlöwe, Norbert Vennemann

Rubber Chemistry and Technology · 2016-06 · 89 (2) · 272-291

DOI: 10.5254/rct.15.84848 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rubber Chemistry and Technology, 2016-06. Verfasst von Yeampon Nakaramontri und 3 weiteren Autor:innen. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotube (CNT)-filled natural rubber (NR) composites were prepared by melt and by latex mixing methods. Also in situ functionalization of CNTs with a silane coupling agent, namely bis(triethoxysilylpropyl)tetrasulfide (TESPT), was done to improve the filler–rubber interactions between CNT surfaces and rubber molecules. The grafting of TESPT molecules on CNT surfaces was confirmed by attenuated total reflection (ATR)–Fourier transform infrared (FTIR) spectroscopy and by the improvement of composite properties. Tensile properties were determined to assess the reinforcement efficiency of the CNTs in the composites. Also, electrical conductivity of the composites was measured to assess the formation of CNT networks (or connected conductive CNT pathways) in the rubber matrix. The results indicate that the composites prepared by latex mixing, in particular with the TESPT, had better tensile properties and electrical conductivities than the composites made by melt mixing. The lowest percolation threshold concentration, about 0.55 phr of CNTs, was observed in the latex–CNT composites, and three-dimensional network formations of CNTs in the rubber matrix were found with added TESPT, used by in situ functionalization. The improvement of filler–rubber interactions with the addition of TESPT was also examined by temperature scanning stress relaxation measurements, revealing the relaxation modulus, the relaxation spectrum, and an estimate of the cross-link density.

Zitieren

APA

Nakaramontri, Y., Nakason, C., Kummerlöwe, C., & Vennemann, N. (2016). ENHANCEMENT OF ELECTRICAL CONDUCTIVITY AND FILLER DISPERSION OF CARBON NANOTUBE FILLED NATURAL RUBBER COMPOSITES BY LATEX MIXING AND IN SITU SILANIZATION. Rubber Chemistry and Technology, 89(2), 272-291. https://doi.org/10.5254/rct.15.84848

Vancouver

Nakaramontri Y, Nakason C, Kummerlöwe C, Vennemann N. ENHANCEMENT OF ELECTRICAL CONDUCTIVITY AND FILLER DISPERSION OF CARBON NANOTUBE FILLED NATURAL RUBBER COMPOSITES BY LATEX MIXING AND IN SITU SILANIZATION. Rubber Chemistry and Technology. 2016;89(2):272-291. doi:10.5254/rct.15.84848

BibTeX
@article{Nakaramontri2016,
  author = {Nakaramontri, Yeampon and Nakason, Charoen and Kummerlöwe, Claudia and Vennemann, Norbert},
  title = {ENHANCEMENT OF ELECTRICAL CONDUCTIVITY AND FILLER DISPERSION OF CARBON NANOTUBE FILLED NATURAL RUBBER COMPOSITES BY LATEX MIXING AND IN SITU SILANIZATION},
  journal = {Rubber Chemistry and Technology},
  year = {2016},
  volume = {89},
  number = {2},
  pages = {272--291},
  doi = {10.5254/rct.15.84848}
}
Kostenlos starten →