EUVIMEDEUVIMED entdecken
Crossref

AUTOMATIC PATH PROGRAMMING FOR THE MANUFACTURING OF SHEET METAL COMPONENTS USING INCREMENTAL FORMING TECHNOLOGY

Mikel Ortiz Edesa, MARILUZ PENALVA OSCOZ, MAITE ORTIZ DE ZARATE, Hai Yang, XIANDONG CHEN, Xiaojun Liu

DYNA · 01.11.2024 · 99 (6) · 585-593

DOI: 10.52152/d11179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift DYNA, online erschienen am 01.11.2024. Verfasst von Mikel Ortiz Edesa und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Asymmetric Incremental Sheet Forming (AISF) is an unconventional forming technology that involves localized and progressive plastic deformation of a sheet using a tool, typically a punch, following a continuous and numerically controlled path. Due to its specific characteristics and advantages, such as flexibility and relatively low implementation cost, it is considered a technology with great potential for competitively producing small series of sheet metal components. However, there are still some challenges, such as the lack of specific CAM tools for this technology, which has hindered its industrialization. Although the process may appear simple, with a 3D path sufficient to transform the original flat sheet into the final part, it has been observed that the manufacturing of real designs requires extensive knowledge of the technology to choose the appropriate path based on the target geometry. In this regard, this study presents a new solution developed by Tecnalia that incorporates expert process knowledge and enables automatic programming of Incremental Forming paths. Specifically, the solution allows programming paths aimed at manufacturing different geometric features commonly found in sheet metal components. This development has been validated through the manufacturing of several parts in a robotic cell implemented at Southeast University in Nanjing.

Zitieren

APA

Edesa, M. O., OSCOZ, M. P., ZARATE, M. O. D., Yang, H., CHEN, X., & Liu, X. (2024). AUTOMATIC PATH PROGRAMMING FOR THE MANUFACTURING OF SHEET METAL COMPONENTS USING INCREMENTAL FORMING TECHNOLOGY. DYNA, 99(6), 585-593. https://doi.org/10.52152/d11179

Vancouver

Edesa MO, OSCOZ MP, ZARATE MOD, Yang H, CHEN X, Liu X. AUTOMATIC PATH PROGRAMMING FOR THE MANUFACTURING OF SHEET METAL COMPONENTS USING INCREMENTAL FORMING TECHNOLOGY. DYNA. 2024;99(6):585-593. doi:10.52152/d11179

BibTeX
@article{Edesa2024,
  author = {Edesa, Mikel Ortiz and OSCOZ, MARILUZ PENALVA and ZARATE, MAITE ORTIZ DE and Yang, Hai and CHEN, XIANDONG and Liu, Xiaojun},
  title = {AUTOMATIC PATH PROGRAMMING FOR THE MANUFACTURING OF SHEET METAL COMPONENTS USING INCREMENTAL FORMING TECHNOLOGY},
  journal = {DYNA},
  year = {2024},
  volume = {99},
  number = {6},
  pages = {585--593},
  doi = {10.52152/d11179}
}
Kostenlos starten →