Hydrogen Recovery from Biomass-Derived Syngas Using Pressure Swing Adsorption: Optimization and Application Prospects in the Energy Sector
Journal of Agricultural Engineering (India) · 28.07.2026 · 63 (3)
DOI: 10.52151/jae2026633.2030 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Agricultural Engineering (India), online erschienen am 28.07.2026. Verfasst von Pranay Rajendra Lanjekar und 2 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.
Abstract (Originalsprache)
Population growth–driven increases in energy demand emphasize the importance of renewable hydrogen (biohydrogen) as a sustainable alternative to predominantly fossil-fuel-based hydrogen production. Hydrogen production from biomass gasification requires effective separation of hydrogen from syngas. In this study, a Pressure Swing Adsorption (PSA) system was designed and developed for hydrogen separation. Zeolite 3 Å was used as the adsorbent to separate hydrogen gas via sieving under pressurized conditions. The performance of the PSA system was investigated using statistical optimization with Response Surface Methodology (RSM) in Design-Expert 13. The effects of operating pressure and cycle time on hydrogen separation efficiency and hydrogen purity were evaluated. The results show that separation efficiency and purity respond differently to cycle time under high pressure. Maximum hydrogen separation efficiency (85.65%) was achieved at high pressure of 6 kg cm-² and longer cycle time of 20 s, indicating improved adsorbent utilization and mass transfer. In contrast, the highest hydrogen purity (88.29%) was achieved at the same pressure (6 kg cm-²) but with a shorter cycle time of 10 s, which limited impurity breakthrough. Overall, increasing pressure significantly enhanced separation performance, while cycle time had a contrasting effect on efficiency and purity, demonstrating the critical role of operating parameters in PSA system optimization. This study demonstrates the feasibility of recovering hydrogen from biomass-derived syngas at medium purity for industrial energy applications and highlights the potential for further optimization to achieve higher-purity hydrogen for future clean energy systems.
Zitieren
APA
Lanjekar, P. R., Panwar, N. L., & Soni, K. (2026). Hydrogen Recovery from Biomass-Derived Syngas Using Pressure Swing Adsorption: Optimization and Application Prospects in the Energy Sector. Journal of Agricultural Engineering (India), 63(3). https://doi.org/10.52151/jae2026633.2030
Vancouver
Lanjekar PR, Panwar NL, Soni K. Hydrogen Recovery from Biomass-Derived Syngas Using Pressure Swing Adsorption: Optimization and Application Prospects in the Energy Sector. Journal of Agricultural Engineering (India). 2026;63(3). doi:10.52151/jae2026633.2030
BibTeX
@article{Lanjekar2026,
author = {Lanjekar, Pranay Rajendra and Panwar, Narayan Lal and Soni, Khemlata},
title = {Hydrogen Recovery from Biomass-Derived Syngas Using Pressure Swing Adsorption: Optimization and Application Prospects in the Energy Sector},
journal = {Journal of Agricultural Engineering (India)},
year = {2026},
volume = {63},
number = {3},
doi = {10.52151/jae2026633.2030}
}
EUVIMED