EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

INFLUÊNCIA DE DIFERENTES TÉCNICAS DE MODELAGEM NO DESEMPENHO DE VIGAS DE MLC DA ESPÉCIE PARICÁ

João Gustavo Caldeira Chaves, Thiago Pereira Fonseca, Pedro Ignácio Lima Gadêlha Jardim, André Luis Christoforo, Diego Henrique de Almeida

Revista de Engenharia e Tecnologia · 2026

DOI: 10.5212/jqesm689 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista de Engenharia e Tecnologia, 2026. Verfasst von João Gustavo Caldeira Chaves und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite advances in timber structure modeling, a gap remains in the comparative assessment of techniques applied to glued laminated timber (glulam) beams made from Amazonian species, aggravated by the scarcity of physical–mechanical data. This study evaluates the impact of different numerical modeling strategies on the structural performance of paricá glulam beams. Three approaches were considered: two layered-section models with orthotropic and isotropic behavior, and a unified orthotropic section. Geometry and properties were selected from the literature and complemented by normative correlations, with validation against four-point bending tests and a mesh sensitivity analysis. Among the discretizations evaluated, the beam with 10 mm elements presented the best balance between accuracy and computational time. Considering the values from the experimental reference, the layered and unified models satisfactorily reproduced the global responses, with errors of 0.75% and 0.76%, respectively, whereas the isotropic assumption artificially increased flexural stiffness and resulted in a 7.25% error. The stress distributions confirmed that orthotropy was crucial to capture gradients and local concentrations, while the unified section maintained good agreement with reduced processing time.

Zitieren

APA

Chaves, J. G. C., Fonseca, T. P., Jardim, P. I. L. G., Christoforo, A. L., & Almeida, D. H. D. (2026). INFLUÊNCIA DE DIFERENTES TÉCNICAS DE MODELAGEM NO DESEMPENHO DE VIGAS DE MLC DA ESPÉCIE PARICÁ. Revista de Engenharia e Tecnologia. https://doi.org/10.5212/jqesm689

Vancouver

Chaves JGC, Fonseca TP, Jardim PILG, Christoforo AL, Almeida DHD. INFLUÊNCIA DE DIFERENTES TÉCNICAS DE MODELAGEM NO DESEMPENHO DE VIGAS DE MLC DA ESPÉCIE PARICÁ. Revista de Engenharia e Tecnologia. 2026. doi:10.5212/jqesm689

BibTeX
@article{Chaves2026,
  author = {Chaves, João Gustavo Caldeira and Fonseca, Thiago Pereira and Jardim, Pedro Ignácio Lima Gadêlha and Christoforo, André Luis and Almeida, Diego Henrique de},
  title = {INFLUÊNCIA DE DIFERENTES TÉCNICAS DE MODELAGEM NO DESEMPENHO DE VIGAS DE MLC DA ESPÉCIE PARICÁ},
  journal = {Revista de Engenharia e Tecnologia},
  year = {2026},
  doi = {10.5212/jqesm689}
}
Kostenlos starten →