EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micro-Shear Bond Strength between Mineral Trioxide Aggregate Paste Fast Setting and Different Composite Materials

Othman Husham Abdulhameed, Hanaa Abduljabbar Saleh, Mohammed Khalil Sabah, Haneen Fahem Abdulqader, Hussein Owaid Hussein Ali

Dentistry 3000 · 30.10.2026 · 14 (3)

DOI: 10.5195/d3000.2026.1656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry 3000, online erschienen am 30.10.2026. Verfasst von Othman Husham Abdulhameed und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to estimate the micro-shear bond strength between mineral trioxide aggregate (MTA) “fast setting” premix paste (ENDOCEMTM, Maruchi, Wonju, Korea) and different composite materials (EverXTM Flow GC, Japan and Bulk FillTM Flowable A2, 3M ESPE, USA). A total of 40 resinous molds were prepared for application of Premix MTA paste, then the restorative material was applied with different times of restoration. The total samples were divided into 2 groups according to the time of application of restorative materials (group A after 5 min and group B after 24 h), then each group was divided into 2 subgroups according to the restorative materials used (A1 and B1 subgroups with EverXTM Flow, GC, Japan, and A2 and B2 subgroups with Bulk FillTM Flowable A2, 3M ESPE, USA). The mean micro-shear bond strength increased with time elapsed between the application of the MTA and the placement of the restorative materials. After 24 h, Subgroup B2 had the highest bond strength, followed by Subgroup B1. After 5 min, Subgroup A1 had a higher bond strength than Subgroup A2. The properties of the calcium-silicate- materials (CSMs) improved after waiting 24 hrs, which contradicts the manufacturer’s recommendation to allow only 3 min for the initial setting. Incorporating the 10-MDP monomer in the dental adhesive enhanced integration at the interface between the adhesive and the restorative resin, as reflected in the mixed mode of fracturing.

Zitieren

APA

Abdulhameed, O. H., Saleh, H. A., Sabah, M. K., Abdulqader, H. F., & Ali, H. O. H. (2026). Micro-Shear Bond Strength between Mineral Trioxide Aggregate Paste Fast Setting and Different Composite Materials. Dentistry 3000, 14(3). https://doi.org/10.5195/d3000.2026.1656

Vancouver

Abdulhameed OH, Saleh HA, Sabah MK, Abdulqader HF, Ali HOH. Micro-Shear Bond Strength between Mineral Trioxide Aggregate Paste Fast Setting and Different Composite Materials. Dentistry 3000. 2026;14(3). doi:10.5195/d3000.2026.1656

BibTeX
@article{Abdulhameed2026,
  author = {Abdulhameed, Othman Husham and Saleh, Hanaa Abduljabbar and Sabah, Mohammed Khalil and Abdulqader, Haneen Fahem and Ali, Hussein Owaid Hussein},
  title = {Micro-Shear Bond Strength between Mineral Trioxide Aggregate Paste Fast Setting and Different Composite Materials},
  journal = {Dentistry 3000},
  year = {2026},
  volume = {14},
  number = {3},
  doi = {10.5195/d3000.2026.1656}
}
Kostenlos starten →