Hipercorig – an innovative hydraulic coring system recovering over 60 m long sediment cores from deep perialpine lakes
Scientific Drilling · 01.12.2020 · 28 · 29-41
DOI: 10.5194/sd-28-29-2020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scientific Drilling, online erschienen am 01.12.2020. Verfasst von Ulrich Harms und 9 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
The record of past environmental conditions and changes archived in lacustrine sediments serves as an important element in paleoenvironmental and climate research. A main barrier in accessing these archives is the undisturbed recovery of long cores from deep lakes. In this study, we have developed and tested a new, environmentally friendly coring tool and modular barge, centered around a down-the-hole hydraulic hammering of an advanced piston coring system, called the Hipercorig. Test beds for the evaluation of the performance of the system were two periglacial lakes, Mondsee and Constance, located on the northern edge of the Alpine chain. These lakes are notoriously difficult to sample beyond ∼ 10 m sediment depths due to dense glacial deposits obstructing deeper coring. Both lakes resemble many global lake systems with hard and coarse layers at depth, so the gained experience using this novel technology can be applied to other lacustrine or even marine basins. These two experimental drilling projects resulted in up to 63 m coring depth and successful coring operations in up to 204 m water depth, providing high-quality, continuous cores with 87 % recovery. Initial core description and scanning of the 63 m long core from Mondsee and two 20 and 24 m long cores from Lake Constance provided novel insights beyond the onset of deglaciation of the northern Alpine foreland dating back to ∼ 18 400 cal BP.
Förderung
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Harms, U., Raschke, U., Anselmetti, F. S., Strasser, M., Wittig, V., Wessels, M., Schaller, S., Fabbri, S. C., Niederreiter, R., & Schwalb, A. (2020). Hipercorig – an innovative hydraulic coring system recovering over 60 m long sediment cores from deep perialpine lakes. Scientific Drilling, 28(0), 29-41. https://doi.org/10.5194/sd-28-29-2020
Vancouver
Harms U, Raschke U, Anselmetti FS, Strasser M, Wittig V, Wessels M, et al. Hipercorig – an innovative hydraulic coring system recovering over 60 m long sediment cores from deep perialpine lakes. Scientific Drilling. 2020;28(0):29-41. doi:10.5194/sd-28-29-2020
BibTeX
@article{Harms2020,
author = {Harms, Ulrich and Raschke, Ulli and Anselmetti, Flavio S. and Strasser, Michael and Wittig, Volker and Wessels, Martin and Schaller, Sebastian and Fabbri, Stefano C. and Niederreiter, Richard and Schwalb, Antje},
title = {Hipercorig – an innovative hydraulic coring system recovering over 60 m long sediment cores from deep perialpine lakes},
journal = {Scientific Drilling},
year = {2020},
volume = {28},
number = {0},
pages = {29--41},
doi = {10.5194/sd-28-29-2020}
}
EUVIMED