EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Optimasi Multikriteria Mortar Abu Sekam Padi Menggunakan Entropy–TOPSIS

Sugiarto Sugiarto, Angga Setiadi, Samsul Arifin, Sofyan Dwi Laksono

Jurnal Rekayasa Sipil dan Arsitektur · 2026

DOI: 10.51903/s12mat37 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Rekayasa Sipil dan Arsitektur, 2026. Verfasst von Sugiarto Sugiarto und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of supplementary cementitious materials is widely investigated as a strategy for reducing Portland-cement demand; however, mixture selection should account for mechanical, physical, and economic criteria simultaneously. This study evaluated five rice husk ash (RHA) substitution levels (0%, 5%, 10%, 15%, and 20%) using 28-day compressive strength, water absorption, and estimated direct material cost. Entropy weighting was used to quantify the data-driven discriminating power of the three criteria, and TOPSIS was used to compare the alternatives, followed by sensitivity analysis. Among the investigated substitution levels, M10 (10% RHA) produced the highest mean compressive strength (24.60 MPa), the lowest mean water absorption (6.30%), and a 3.91% lower estimated direct material cost than the control. The Entropy-derived weights were 45.49% for water absorption, 43.45% for compressive strength, and 11.06% for cost; these values reflect variability in the five-alternative dataset rather than engineering importance. TOPSIS ranked M10 first (closeness coefficient = 0.9595). A threshold sensitivity analysis showed that M15 overtook M10 only when the cost weight increased to approximately 60.3%, while the remaining weight was distributed between the two technical criteria in their original Entropy proportion. The result therefore identifies M10 as the best-performing mixture among the five investigated substitution levels, not as a global optimum. All compressive-strength and water-absorption values reported in this paper originate from the laboratory tests described in the study.

Zitieren

APA

Sugiarto, S., Setiadi, A., Arifin, S., & Laksono, S. D. (2026). Optimasi Multikriteria Mortar Abu Sekam Padi Menggunakan Entropy–TOPSIS. Jurnal Rekayasa Sipil dan Arsitektur. https://doi.org/10.51903/s12mat37

Vancouver

Sugiarto S, Setiadi A, Arifin S, Laksono SD. Optimasi Multikriteria Mortar Abu Sekam Padi Menggunakan Entropy–TOPSIS. Jurnal Rekayasa Sipil dan Arsitektur. 2026. doi:10.51903/s12mat37

BibTeX
@article{Sugiarto2026,
  author = {Sugiarto, Sugiarto and Setiadi, Angga and Arifin, Samsul and Laksono, Sofyan Dwi},
  title = {Optimasi Multikriteria Mortar Abu Sekam Padi Menggunakan Entropy–TOPSIS},
  journal = {Jurnal Rekayasa Sipil dan Arsitektur},
  year = {2026},
  doi = {10.51903/s12mat37}
}
Kostenlos starten →