EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

An Experimental Approach to Energy Harvesting Through a Speed Breaker Using Piezoelectric Material

Ali Hassan, Muhammad Bader Munir, Muhammad Waheed Ashraf, Muhammad Khuram Rashid, Zaigham Abbas, Ali Ahmed

Pakistan Journal of Engineering and Technology · 24.07.2026 · 9 (2) · 1-7

DOI: 10.51846/vol9iss2pp1-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pakistan Journal of Engineering and Technology, online erschienen am 24.07.2026. Verfasst von Ali Hassan und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work examines the experimental method of energy harvesting with a speed breaker based on piezoelectric materials, specifically lead zirconate titanate (PZT). The system transforms the mechanical stress of the vehicles into electrical power to drive the streetlights and other transport-related electronics. In SolidWorks, a CAD model was created that included piezoelectric disks, copper electrodes, a piston-cylinder configuration, and springs, after which structural analysis was done in ANSYS to determine the stress, strain, and deformation of the design under car and motorcycle load. A three-disk piezoelectric prototype was produced, and a series of three piezoelectric disks was connected, and a rectifier circuit was added. Motorcycles and cars were used to test voltage generation at 0 and 15 km/h. Findings indicated that the weight of the vehicle and speed have a significant effect on output voltage; light motorcycles yielded a maximum of 4.13 V, whereas heavy cars yielded a maximum of 14.16 V. The paper shows that road traffic is an effective way of generating a renewable energy source that can sustain cleaner and more efficient urban power systems.

Zitieren

APA

Hassan, A., Munir, M. B., Ashraf, M. W., Rashid, M. K., Abbas, Z., & Ahmed, A. (2026). An Experimental Approach to Energy Harvesting Through a Speed Breaker Using Piezoelectric Material. Pakistan Journal of Engineering and Technology, 9(2), 1-7. https://doi.org/10.51846/vol9iss2pp1-7

Vancouver

Hassan A, Munir MB, Ashraf MW, Rashid MK, Abbas Z, Ahmed A. An Experimental Approach to Energy Harvesting Through a Speed Breaker Using Piezoelectric Material. Pakistan Journal of Engineering and Technology. 2026;9(2):1-7. doi:10.51846/vol9iss2pp1-7

BibTeX
@article{Hassan2026,
  author = {Hassan, Ali and Munir, Muhammad Bader and Ashraf, Muhammad Waheed and Rashid, Muhammad Khuram and Abbas, Zaigham and Ahmed, Ali},
  title = {An Experimental Approach to Energy Harvesting Through a Speed Breaker Using Piezoelectric Material},
  journal = {Pakistan Journal of Engineering and Technology},
  year = {2026},
  volume = {9},
  number = {2},
  pages = {1--7},
  doi = {10.51846/vol9iss2pp1-7}
}
Kostenlos starten →