Designing a PLC-based HVDC Fault Protection Scheme using a Relaying Algorithm
Pakistan Journal of Engineering and Technology · 02.07.2026 · 9 (1) · 52-58
DOI: 10.51846/vol9iss1pp52-58 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pakistan Journal of Engineering and Technology, online erschienen am 02.07.2026. Verfasst von Muhammad Faiq und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
A rapid rise in DC faults is observed due to the unavailability of properly designed protection schemes for DC networks. The most prevalent faults are line-to-line L-L and line-ground L-G, etc. For modern multi-terminal high voltage systems MTHVS, DC fault protection is a top priority. The fault detection speed for HVDC systems must be very fast due to the rapid rise in fault current. For conventional low HP drives, undervoltage protection is based on the measured voltage on the DC bus of the drive’s unit, rather than the AC input voltage. This fact must be understood to help with troubleshooting. The need for additional power is growing to satisfy the increasing load demand, making High Voltage Direct Current (HVDC) transmissions important. NTDC suffered transmission and distribution losses totaling about 18%. The energy shortages can be mitigated by increasing the usage of renewable energy sources and decreasing losses. HVDC power transmission may be essential for Pakistan's electricity sector to meet these objectives. In this research work, the focus is to create primary and secondary HVDC protection based on a relaying algorithm. Numerous projects and novel designs have been developed concerning these specific relay logic schemes; however, the goal of this scheme is to produce a new PLC-based relay logic technique.
Zitieren
APA
Faiq, M., Miraj, I., Ellahi, M., & Raza, A. (2026). Designing a PLC-based HVDC Fault Protection Scheme using a Relaying Algorithm. Pakistan Journal of Engineering and Technology, 9(1), 52-58. https://doi.org/10.51846/vol9iss1pp52-58
Vancouver
Faiq M, Miraj I, Ellahi M, Raza A. Designing a PLC-based HVDC Fault Protection Scheme using a Relaying Algorithm. Pakistan Journal of Engineering and Technology. 2026;9(1):52-58. doi:10.51846/vol9iss1pp52-58
BibTeX
@article{Faiq2026,
author = {Faiq, Muhammad and Miraj, Irfan and Ellahi, Manzoor and Raza, Ali},
title = {Designing a PLC-based HVDC Fault Protection Scheme using a Relaying Algorithm},
journal = {Pakistan Journal of Engineering and Technology},
year = {2026},
volume = {9},
number = {1},
pages = {52--58},
doi = {10.51846/vol9iss1pp52-58}
}
EUVIMED