EUVIMEDEUVIMED entdecken
Crossref

Production of ferroalloys from carbonaceous rock with replacement of steel chips with magnetite

V.M. Shevko, A.M. Mambetali, G.E. Karataeva, B.A. Lavrov

Engineering Journal of Satbayev University · 2022

DOI: 10.51301/ejsu.2022.i2.01 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Journal of Satbayev University, 2022. Verfasst von V.M. Shevko und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents the results of studies on the production of ferrosilicon, ferrosilicoaluminium and Fe-Si-Al ligatures when replacing steel chips with magnetite. The object of research was the carbonaceous rock of the Borly deposit. Thermodynamic modeling was carried out using the HSC-5.1, Chemistry software package of the Finnish metallurgical company Outokumpu, based on the principle of minimizing Gibbs energy, and experimental studies-electric melting in an arc furnace at 1000-1400°C begin to form. It was found that under equilibrium conditions, the interaction of Borly ash components with magnetite and carbon in the presence of silicon oxide with silicon-containing reduction products - Si, SiO, FeSi2, Fe3Si, FeSi, SiC; with an increase in the amount of carbon, the degree of silicon extraction in SiC increases. in the elemental state and decreases- in Fe3Si, FeSi; the degree of silicon extraction into the alloy increases, amounting to at 2000°C and 51% carbon, and the degree of silicon transition into the alloy also increases, amounting to 76.4% at 2100°C and 51% carbon. It is determined that, from Borly ash under equilibrium conditions, it is possible to obtain ferrosilicon grades FeSi15, FeSi25, FeSi45 and FeSi50 in the temperature range 1260-1860°C and ferrosilicoaluminium grades FS45A10 and FS45A15 in the temperature range 1930-2100°C. It has been experimentally established that ferrosilicon of the FeSi60 brand (68.7% Si, 1.3% Al) is formed from the conclusions of the electric melting of coal waste together with magnetite concentrate, quartzite and coke.

Zitieren

APA

Shevko, V., Mambetali, A., Karataeva, G., & Lavrov, B. (2022). Production of ferroalloys from carbonaceous rock with replacement of steel chips with magnetite. Engineering Journal of Satbayev University. https://doi.org/10.51301/ejsu.2022.i2.01

Vancouver

Shevko V, Mambetali A, Karataeva G, Lavrov B. Production of ferroalloys from carbonaceous rock with replacement of steel chips with magnetite. Engineering Journal of Satbayev University. 2022. doi:10.51301/ejsu.2022.i2.01

BibTeX
@article{Shevko2022,
  author = {Shevko, V.M. and Mambetali, A.M. and Karataeva, G.E. and Lavrov, B.A.},
  title = {Production of ferroalloys from carbonaceous rock with replacement of steel chips with magnetite},
  journal = {Engineering Journal of Satbayev University},
  year = {2022},
  doi = {10.51301/ejsu.2022.i2.01}
}
Kostenlos starten →