Using tannery wastes in poultry feed: a matter of concern for safe poultry production in Bangladesh
Online Journal of Animal and Feed Research · 27.01.2024
DOI: 10.51227/ojafr.2024.1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Online Journal of Animal and Feed Research, online erschienen am 27.01.2024. Verfasst von Md. Saiful ISLAM und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 3.0).
Abstract (Originalsprache)
Nowadays tannery waste is a matter of concern because if it used as livestock feed, it could cause health hazards to humans. Therefore, this study was conducted to know the generation rates, utilization, disposal method of tannery solid wastes (TSWs), and inclusion level of it into the poultry feed. Moreover, this study determined the physical and chemical parameters of interest including moisture content, crude protein (CP) levels, and the presence of heavy metals such as chromium (Cr) and lead (Pb) in the poultry feeds that were sold in the studied area. For these purposes, a field survey was conducted with twenty tannery industries. Broiler feed samples were procured from multiple farmers situated in the Savar area of Dhaka. The feed source was classified into two categories, namely registered and unregistered feed mills. According to the study, wet blue trimmings was generated in 3.84% that was used as an ingredient of poultry feed. In addition, 55% of tanneries landfilled their waste, while 30% of them sold it for poultry feed. The utilization of TSWs in poultry feed production in this country was limited to a maximum of 1.314% of the total annual production. Besides, the CP% was determined in the range of 24.24 - 13.32 % and 18.15 - 11.01 % for broiler starters and growers, respectively, where lower CP content was found only in unregistered feed mills. Trace amounts of Cr and Pb were identified in each of the feed samples at very low concentrations. In conclusion, it can be stated that the percentage of tannery solid wastes mixed poultry feed was generated in negligible amounts and the registered companies’ feed was found normal in all aspects of the quality tested in the study. Keywords: Broiler feed, Feed mill, Heavy metal, Physical quality, Tannery solid waste
Zitieren
APA
ISLAM, M. S., PROTIK, A. S., ZANNAT, M. A., NAIM, Z., KABIR, M. E., ASADUZZAMAN, M., & AKTER, M. (2024). Using tannery wastes in poultry feed: a matter of concern for safe poultry production in Bangladesh. Online Journal of Animal and Feed Research. https://doi.org/10.51227/ojafr.2024.1
Vancouver
ISLAM MS, PROTIK AS, ZANNAT MA, NAIM Z, KABIR ME, ASADUZZAMAN M, et al. Using tannery wastes in poultry feed: a matter of concern for safe poultry production in Bangladesh. Online Journal of Animal and Feed Research. 2024. doi:10.51227/ojafr.2024.1
BibTeX
@article{ISLAM2024,
author = {ISLAM, Md. Saiful and PROTIK, Ankur Sarker and ZANNAT, Mst. Arefatul and NAIM, Zannatul and KABIR, Md. Enayet and ASADUZZAMAN, Md. and AKTER, Mofassara},
title = {Using tannery wastes in poultry feed: a matter of concern for safe poultry production in Bangladesh},
journal = {Online Journal of Animal and Feed Research},
year = {2024},
doi = {10.51227/ojafr.2024.1}
}
EUVIMED