EUVIMEDEUVIMED entdecken
Systematische Übersicht

Pemanfaatan Limbah Plastik Polyethylene Terephthalate (PET) Sebagai Agregat Kasar Beton Ringan: Systematic Literature Review

Arrisha Anggraini, Wenny Herdianti, Ivana Christine Sembiring Brahmana, Titonik Feberman Hia, Melvi Maulita Napitupulu, I Gede Wyana Lokantara

JURNAL TECNOSCIENZA · 28.04.2026 · 10 (2) · 267-282

DOI: 10.51158/thjvb146 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift JURNAL TECNOSCIENZA, online erschienen am 28.04.2026. Verfasst von Arrisha Anggraini und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste, particularly polyethylene terephthalate (PET) from beverage bottles, constitutes a major source of non-biodegradable waste that is difficult to decompose and poses long-term environmental risks. The utilization of polyethylene terephthalate (PET) waste as a partial replacement for coarse aggregate in concrete offers a dual benefit: reducing plastic waste while conserving natural aggregates and decreasing concrete density for lightweight applications.This study systematically examines the mechanical properties of polyethylene terephthalate (PET)-based concrete through a systematic literature review following the PRISMA 2020 protocol, covering publications from 2018 to 2026. A literature search was conducted across the SINTA, Portal Garuda, Google Scholar, and Scopus databases, yielding 155 initial articles. After a rigorous screening process, 7 experimental studies met the inclusion criteria, namely those that utilized polyethylene terephthalate (PET) as a coarse aggregate substitute and reported quantitative data on compressive strength and/or density. The synthesis reveals a consistent trend in which increasing polyethylene terephthalate (PET) content reduces compressive strength (ranging from 13–20 MPa at 5–10% substitution and 7–10 MPa at >25%) as well as density (1,645–1,900 kg/m³), resulting in lightweight non-structural concrete. A combination of PET and rice husk ash achieved an optimal compressive strength of 24.85 MPa. Substitution levels of 5–10% are most suitable for semi-structural elements, whereas levels above 25% are optimal for non-structural applications such as partition panels and precast drainage channels.

Zitieren

APA

Anggraini, A., Herdianti, W., Brahmana, I. C. S., Hia, T. F., Napitupulu, M. M., & Lokantara, I. G. W. (2026). Pemanfaatan Limbah Plastik Polyethylene Terephthalate (PET) Sebagai Agregat Kasar Beton Ringan: Systematic Literature Review. JURNAL TECNOSCIENZA, 10(2), 267-282. https://doi.org/10.51158/thjvb146

Vancouver

Anggraini A, Herdianti W, Brahmana ICS, Hia TF, Napitupulu MM, Lokantara IGW. Pemanfaatan Limbah Plastik Polyethylene Terephthalate (PET) Sebagai Agregat Kasar Beton Ringan: Systematic Literature Review. JURNAL TECNOSCIENZA. 2026;10(2):267-282. doi:10.51158/thjvb146

BibTeX
@article{Anggraini2026,
  author = {Anggraini, Arrisha and Herdianti, Wenny and Brahmana, Ivana Christine Sembiring and Hia, Titonik Feberman and Napitupulu, Melvi Maulita and Lokantara, I Gede Wyana},
  title = {Pemanfaatan Limbah Plastik Polyethylene Terephthalate (PET) Sebagai Agregat Kasar Beton Ringan: Systematic Literature Review},
  journal = {JURNAL TECNOSCIENZA},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {267--282},
  doi = {10.51158/thjvb146}
}
Kostenlos starten →