EUVIMEDEUVIMED entdecken
Crossref

Mechanisms of Environmentally Induced Crack Initiation in Humid Air for New-Generation Al-Zn-Mg-Cu Alloys

Tim L. Burnett, Ryan Euesden, Yasser Aboura, Yichao Yao, Matthew E. Curd, Cameron Grant, Al Garner, N. J. Henry Holroyd, Zak Barrett, Christian E. Engel, Phil B. Prangnell

Corrosion · 01.08.2023 · 79 (8) · 831-849

DOI: 10.5006/4336 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Corrosion, online erschienen am 10.07.2023. Verfasst von Tim L. Burnett und 10 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 83 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent experience has shown that new-generation 7xxx-series alloys, that have a high Zn content and Zn/Mg ratios, have a greater susceptibility to hydrogen-environmental induced cracking (H-EIC) on exposure to humid air than more established materials, like AA7050. In this study, we report new evidence of the EIC initiation and crack growth behavior of two new-generation alloys, AA7085 and AA7449, when exposed to 50% humidity. In situ, time-lapse, optical imaging over large areas has enabled the exact initiation sites to be identified and investigated with high-resolution fractographic studies, providing evidence for the sequence and mechanisms of initiation and transition to sustained cracking. A consistent behavior was observed for both alloys. This has revealed that minute-scale corrosion reactions, involving highly localized condensed water, are necessary for initiation. The preferred initiation sites are metal ligaments between surface-connected pore clusters and/or intermetallic particles that are subjected to high-stress concentration and undergo mechanical damage with associated higher levels of local oxidation. The growth of short protocracks from these sites is a distinct stage and displays intermittent arrest markings evidenced by localized corrosion. In contrast, in humid air environments, long cracks in these alloys exhibited relatively constant, higher velocity, with extremely limited corrosion commensurate with oxidation of a free surface in this environment resulting in approximately 5 nm oxide layer.

Zitieren

APA

Burnett, T. L., Euesden, R., Aboura, Y., Yao, Y., Curd, M. E., Grant, C., Garner, A., Holroyd, N. J. H., Barrett, Z., Engel, C. E., & Prangnell, P. B. (2023). Mechanisms of Environmentally Induced Crack Initiation in Humid Air for New-Generation Al-Zn-Mg-Cu Alloys. Corrosion, 79(8), 831-849. https://doi.org/10.5006/4336

Vancouver

Burnett TL, Euesden R, Aboura Y, Yao Y, Curd ME, Grant C, et al. Mechanisms of Environmentally Induced Crack Initiation in Humid Air for New-Generation Al-Zn-Mg-Cu Alloys. Corrosion. 2023;79(8):831-849. doi:10.5006/4336

BibTeX
@article{Burnett2023,
  author = {Burnett, Tim L. and Euesden, Ryan and Aboura, Yasser and Yao, Yichao and Curd, Matthew E. and Grant, Cameron and Garner, Al and Holroyd, N. J. Henry and Barrett, Zak and Engel, Christian E. and Prangnell, Phil B.},
  title = {Mechanisms of Environmentally Induced Crack Initiation in Humid Air for New-Generation Al-Zn-Mg-Cu Alloys},
  journal = {Corrosion},
  year = {2023},
  volume = {79},
  number = {8},
  pages = {831--849},
  doi = {10.5006/4336}
}
Kostenlos starten →