EUVIMEDEUVIMED entdecken
Crossref

Correlation of Stainless Steel Pit Morphology to Humidity-Specific Sea Salt Brine Constituents

J. Srinivasan, A.M. Parey, A.W. Knight, R.F. Schaller, J.S. Locke, E.J. Schindelholz

Corrosion · 01.03.2023 · 79 (3) · 255-267

DOI: 10.5006/4143 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Corrosion, online erschienen am 01.08.2022. Verfasst von J. Srinivasan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 70 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Immersion exposures of 304 stainless steel ground to a #4 finish were conducted in brines representative of the chemistry of sea salt aerosols at low (40%) and high (76%) relative humidity (RH). Low-RH-equivalent brines resulted in cross-hatched pits, whereas high-RH-equivalent brines produced ellipsoidal, faceted pits. Distinct surface microcracking was observed to be associated only with cross-hatched pits and appeared to correlate with a high concentration of dissolved carbonate species in low-RH-equivalent solutions while being absent in the high-RH-equivalent brines. Correlating these results to brine composition suggested that the concentrations of MgCl2 and dissolved carbonate species in the brines could, in the presence of machining-induced surface microstructure and residual stress, determine pit morphology in marine atmospheres, thereby potentially impacting stress corrosion cracking susceptibility and lifetime prediction.

Zitieren

APA

Srinivasan, J., Parey, A., Knight, A., Schaller, R., Locke, J., & Schindelholz, E. (2023). Correlation of Stainless Steel Pit Morphology to Humidity-Specific Sea Salt Brine Constituents. Corrosion, 79(3), 255-267. https://doi.org/10.5006/4143

Vancouver

Srinivasan J, Parey A, Knight A, Schaller R, Locke J, Schindelholz E. Correlation of Stainless Steel Pit Morphology to Humidity-Specific Sea Salt Brine Constituents. Corrosion. 2023;79(3):255-267. doi:10.5006/4143

BibTeX
@article{Srinivasan2023,
  author = {Srinivasan, J. and Parey, A.M. and Knight, A.W. and Schaller, R.F. and Locke, J.S. and Schindelholz, E.J.},
  title = {Correlation of Stainless Steel Pit Morphology to Humidity-Specific Sea Salt Brine Constituents},
  journal = {Corrosion},
  year = {2023},
  volume = {79},
  number = {3},
  pages = {255--267},
  doi = {10.5006/4143}
}
Kostenlos starten →