EUVIMEDEUVIMED entdecken
Crossref

Effect of Lug Angle, Forward and Shaft Speeds, and Number of Passes on Puddling Characteristics and Performance of the Tilling Wheel of Float-Assisted Tiller

Arthur Fajardo, Delfin Suministrado

Philippine Journal of Agricultural and Biosystems Engineering · 2019

DOI: 10.48196/015.01.2019.01 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Philippine Journal of Agricultural and Biosystems Engineering, 2019. Verfasst von Arthur Fajardo und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitieren

Abstract (Originalsprache)

Float-assisted tiller is one of the tillage equipment used for lowland rice production. A float-assisted tiller consists of a front-mounted cage wheel (tilling wheel) and a float on which the engine is mounted. The tilling wheel of the float-assisted tiller functions as a traction and puddling device. The paper studied the effect of lug angle (13° and 0°) on the puddling characteristics and performance of the tilling wheel at three forward speeds (0.5, 1.0 and 1.5 km h-1 ), and three shaft speeds (200, 250 and 300 rev min-1 ) and number of passes (1st, 2nd and 3rd). The experiments were done using a single tilling wheel in a laboratory soil bin using Maahas clay. The highest performance index of 1,334.6 m3 MJ-1 was obtained on 3rd pass using 13° lug angle set at 200 rev min-1 shaft speed and 1.5 km h-1 forward speed. Performance index was affected by the lug angle, forward speed and number of passes. The mean differences of performance index were significant only between 0.5 and 1.0 km h-1 . The highest tractive efficiency was 11.2% with 13° on the 1st pass at 200 rev min-1 and 1.5 km h-1 . Tractive efficiency with 13° lug angle was relatively higher than with 0°. Tractive efficiency was significantly affected by the lug angle and forward speed. The mean differences of tractive efficiency were not significant between 1.0 and 1.5 km h-1 . The best lug angle for float-assisted tiller would be with 13° lug angle operating at 1.0 km h-1 because of high performance index and tractive efficiency.

Zitieren

APA

Fajardo, A., & Suministrado, D. (2019). Effect of Lug Angle, Forward and Shaft Speeds, and Number of Passes on Puddling Characteristics and Performance of the Tilling Wheel of Float-Assisted Tiller. Philippine Journal of Agricultural and Biosystems Engineering. https://doi.org/10.48196/015.01.2019.01

Vancouver

Fajardo A, Suministrado D. Effect of Lug Angle, Forward and Shaft Speeds, and Number of Passes on Puddling Characteristics and Performance of the Tilling Wheel of Float-Assisted Tiller. Philippine Journal of Agricultural and Biosystems Engineering. 2019. doi:10.48196/015.01.2019.01

BibTeX
@article{Fajardo2019,
  author = {Fajardo, Arthur and Suministrado, Delfin},
  title = {Effect of Lug Angle, Forward and Shaft Speeds, and Number of Passes on Puddling Characteristics and Performance of the Tilling Wheel of Float-Assisted Tiller},
  journal = {Philippine Journal of Agricultural and Biosystems Engineering},
  year = {2019},
  doi = {10.48196/015.01.2019.01}
}
Kostenlos starten →