Influence of Post-Deposition Annealing Temperature on the Structural, Morphological, and Optical Properties of Sol–Gel Derived TiO₂ Thin Films
International Journal of Advanced Research in Science Communication and Technology · 31.05.2025 · 750
DOI: 10.48175/ijarsct-28200q ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Advanced Research in Science Communication and Technology, online erschienen am 31.05.2025. Verfasst von Sandip S. Patil and Renuka A. Pawar. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
Titanium dioxide (TiO₂) thin films were successfully synthesized using the sol–gel dip-coating technique and subsequently annealed at temperatures of 300°C, 500°C, 700°C, and 900°C to investigate the influence of post-deposition annealing on their structural, morphological, and optical properties. X-ray diffraction (XRD) analysis confirms the formation of the anatase phase, with crystallinity improving significantly with increasing annealing temperature. Fourier transform infrared (FTIR) spectroscopy reveals the gradual removal of hydroxyl groups and enhancement of Ti–O–Ti bonding, indicating improved structural ordering. Scanning electron microscopy (SEM) shows a clear transition from a porous and loosely packed morphology at lower temperatures to a dense and compact structure at higher temperatures, reflecting grain growth and film densification. UV–Vis spectroscopy demonstrates increased absorption and a red shift in the absorption edge with increasing annealing temperature. The optical band gap, estimated using Tauc plots, decreases from 3.79 eV to 2.41 eV as the annealing temperature increases, which is attributed to improved crystallinity, grain growth, and reduced defect density. The results establish a strong correlation between annealing-induced microstructural evolution and the optical performance of TiO₂ thin films, highlighting the importance of thermal treatment in optimizing their properties for optoelectronic and photovoltaic applications.
Zitieren
APA
Pawar, S. S. P. A. R. A. (2025). Influence of Post-Deposition Annealing Temperature on the Structural, Morphological, and Optical Properties of Sol–Gel Derived TiO₂ Thin Films. International Journal of Advanced Research in Science Communication and Technology, 750. https://doi.org/10.48175/ijarsct-28200q
Vancouver
Pawar SSPARA. Influence of Post-Deposition Annealing Temperature on the Structural, Morphological, and Optical Properties of Sol–Gel Derived TiO₂ Thin Films. International Journal of Advanced Research in Science Communication and Technology. 2025:750. doi:10.48175/ijarsct-28200q
BibTeX
@article{Pawar2025,
author = {Pawar, Sandip S. Patil and Renuka A.},
title = {Influence of Post-Deposition Annealing Temperature on the Structural, Morphological, and Optical Properties of Sol–Gel Derived TiO₂ Thin Films},
journal = {International Journal of Advanced Research in Science Communication and Technology},
year = {2025},
pages = {750},
doi = {10.48175/ijarsct-28200q}
}
EUVIMED