EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Theoretical Analysis of Composite RC Beams with Pultruded GFRP Beams subjected to Impact Loading

Teghreed H. Ibrahim, Ihsan A. S. Alshaarbaf, Abbas A. Allawi, Nazar K. Oukaili, Ayman El-Zohairy, AbdulMuttalab I. Said

Engineering, Technology & Applied Science Research · 05.12.2023 · 13 (6) · 12097-12107

DOI: 10.48084/etasr.6424 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 05.12.2023. Verfasst von Teghreed H. Ibrahim und 5 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Glass Fiber Reinforced Polymer (GFRP) beams have gained attention due to their promising mechanical properties and potential for structural applications. Combining GFRP core and encasing materials creates a composite beam with superior mechanical properties. This paper describes the testing encased GFRP beams as composite Reinforced Concrete (RC) beams under low-velocity impact load. Theoretical analysis was used with practical results to simulate the tested beams' behavior and predict the generated energies during the impact loading. The impact response was investigated using repeated drops of 42.5 kg falling mass from various heights. An analysis was performed using accelerometer readings to calculate the generalized inertial load. The integrated acceleration record and the measured hammer load vs. time data were utilized to determine the generalized bending load and fracture energy. Four forms of energy were calculated at the maximum load. The total energy was calculated and divided into two parts: The first part was gained by the beam's rotational kinetic energy, the bending energy in the specimen, and the elastic strain energy. The second part was the hammer's kinetic energy before striking the beam. The analytical results showed that the bending energy was less than its rotational kinetic energy for the encased GFRP beams and the reference specimens. In contrast, the encased steel beams had high bending energy due to the higher impact load and deflection. Strain energy recorded lower energy values for all specimens with higher bending energy. There is a good agreement between the tested and the calculated inertial and bending force for all beams. The ratio of inertia force to the total impact load for the encased GFRP and encased steel beams to the reference beam is about 9% and 5%, respectively.

Zitieren

APA

Ibrahim, T. H., Alshaarbaf, I. A. S., Allawi, A. A., Oukaili, N. K., El-Zohairy, A., & Said, A. I. (2023). Theoretical Analysis of Composite RC Beams with Pultruded GFRP Beams subjected to Impact Loading. Engineering, Technology & Applied Science Research, 13(6), 12097-12107. https://doi.org/10.48084/etasr.6424

Vancouver

Ibrahim TH, Alshaarbaf IAS, Allawi AA, Oukaili NK, El-Zohairy A, Said AI. Theoretical Analysis of Composite RC Beams with Pultruded GFRP Beams subjected to Impact Loading. Engineering, Technology & Applied Science Research. 2023;13(6):12097-12107. doi:10.48084/etasr.6424

BibTeX
@article{Ibrahim2023,
  author = {Ibrahim, Teghreed H. and Alshaarbaf, Ihsan A. S. and Allawi, Abbas A. and Oukaili, Nazar K. and El-Zohairy, Ayman and Said, AbdulMuttalab I.},
  title = {Theoretical Analysis of Composite RC Beams with Pultruded GFRP Beams subjected to Impact Loading},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {12097--12107},
  doi = {10.48084/etasr.6424}
}
Kostenlos starten →