Determination of the Optimal Cutting Condition and Heating Levels in Induction-Assisted Hard Turning of SKD61 Steel Using HSS Tools
Engineering, Technology & Applied Science Research · 11.08.2026 · 16 (4) · 38363-38368
DOI: 10.48084/etasr.19383 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 11.08.2026. Verfasst von Anh Tuan Do und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the hard turning of hardened SKD61 steel using induction and High-Speed Steel (HSS) cutting tools. The aim is to identify practical cutting conditions and heating levels that reduce the machining load while limiting tool wear. Hardened SKD61 steel, with a hardness of 55–60 HRC, is challenging to machine with conventional, low-cost tools due to its high strength and poor machinability after heat treatment. The Taguchi L27 experimental design was employed, considering four factors: cutting speed, feed rate, depth of cut, and induction-assisted surface temperature. The main cutting force, surface roughness, and maximum flank wear were selected as the response variables. This work is novel in that it defines a feasible induction-assisted hard turning condition in which a lower-cost HSS tool can machine hardened SKD61 steel by controlling the thermal softening of the workpiece. The machining-focused re-analysis showεδ that induction temperature dominates Fc and Ra, with ANOVA contributions of 36.02% and 72.88%, while Vc and Ra mainly control VBmax. Confirmation at 475°C yielded Fc = 404.4 ± 6.9 N, Ra = 1.19 ± 0.09 µm, and VBmax = 0.140 ± 0.014 mm, confirming a balanced machining–quality–wear compromise.
Zitieren
APA
Do, A. T., Hoang, T. K., Nguyen, T. V., & Trieu, Q. H. (2026). Determination of the Optimal Cutting Condition and Heating Levels in Induction-Assisted Hard Turning of SKD61 Steel Using HSS Tools. Engineering, Technology & Applied Science Research, 16(4), 38363-38368. https://doi.org/10.48084/etasr.19383
Vancouver
Do AT, Hoang TK, Nguyen TV, Trieu QH. Determination of the Optimal Cutting Condition and Heating Levels in Induction-Assisted Hard Turning of SKD61 Steel Using HSS Tools. Engineering, Technology & Applied Science Research. 2026;16(4):38363-38368. doi:10.48084/etasr.19383
BibTeX
@article{Do2026,
author = {Do, Anh Tuan and Hoang, Trung Kien and Nguyen, Tuong Vi and Trieu, Quy Huy},
title = {Determination of the Optimal Cutting Condition and Heating Levels in Induction-Assisted Hard Turning of SKD61 Steel Using HSS Tools},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {4},
pages = {38363--38368},
doi = {10.48084/etasr.19383}
}
EUVIMED