EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Bearing Performance of Cement–Fly Ash Stabilized Clay Subgrade

Denny B. Pinasang, Miswar Tumpu, Don R. G. Kabo, Carter Kandou, Herman Tumengkol, Hoong Pin-Lee

Engineering, Technology & Applied Science Research · 06.06.2026 · 16 (3) · 35912-35919

DOI: 10.48084/etasr.17751 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 06.06.2026. Verfasst von Denny B. Pinasang und 5 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clay soils with low bearing capacity pose significant challenges for road pavement subgrade performance, especially in moisture-sensitive environments. This study evaluates the effectiveness of cement–fly ash mixtures for soil stabilization to improve the engineering properties of clay used as a subgrade layer. Laboratory experiments varied the fly ash content (0%, 5%, 10%, 15%, and 20%) while keeping the cement proportion fixed. The stabilized soils were evaluated using Atterberg limits, compaction characteristics, and California Bearing Ratio (CBR) tests. The results show that using cement–fly ash mixtures reduces soil plasticity while increasing maximum dry density and bearing capacity. Optimal performance was observed at 15% fly ash, which produced a significant improvement in CBR compared with untreated soil, whereas higher fly ash contents yielded diminishing strength gains. This study identifies an optimal cement–fly ash combination that improves mechanical performance while maintaining material efficiency, supporting sustainable pavement design. The findings also demonstrate the potential to use industrial by-products to reduce dependence on conventional materials, contributing to the Sustainable Development Goals (SDGs), particularly SDG 9 (Industry, Innovation, and Infrastructure), SDG 11 (Sustainable Cities and Communities), and SDG 12 (Responsible Consumption and Production). The results provide practical guidance for engineers and policymakers in developing cost-effective and environmentally responsible road infrastructure.

Zitieren

APA

Pinasang, D. B., Tumpu, M., Kabo, D. R. G., Kandou, C., Tumengkol, H., & Pin-Lee, H. (2026). Mechanical and Bearing Performance of Cement–Fly Ash Stabilized Clay Subgrade. Engineering, Technology & Applied Science Research, 16(3), 35912-35919. https://doi.org/10.48084/etasr.17751

Vancouver

Pinasang DB, Tumpu M, Kabo DRG, Kandou C, Tumengkol H, Pin-Lee H. Mechanical and Bearing Performance of Cement–Fly Ash Stabilized Clay Subgrade. Engineering, Technology & Applied Science Research. 2026;16(3):35912-35919. doi:10.48084/etasr.17751

BibTeX
@article{Pinasang2026,
  author = {Pinasang, Denny B. and Tumpu, Miswar and Kabo, Don R. G. and Kandou, Carter and Tumengkol, Herman and Pin-Lee, Hoong},
  title = {Mechanical and Bearing Performance of Cement–Fly Ash Stabilized Clay Subgrade},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {35912--35919},
  doi = {10.48084/etasr.17751}
}
Kostenlos starten →