EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Development of a Miniaturized Multiband Patch Antenna Incorporating Metamaterials for IoT Applications

Tatenda Thomas Chigwende, Dominic Konditi, Aliyu Danjuma Usman

Engineering, Technology & Applied Science Research · 04.04.2026 · 16 (2) · 34226-34234

DOI: 10.48084/etasr.17361 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 04.04.2026. Verfasst von Tatenda Thomas Chigwende und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design, simulation, and fabrication of a novel compact metamaterial-based patch antenna for Internet of Things (IoT) applications. The antenna operates over four frequency bands: 868 MHz, 2.45 GHz, 4.2 GHz, and 5.8 GHz. The reduction in the size of the antenna was achieved using a parasitic patch along with a combination of Complementary Split Ring Resonators (CSRRs). The total area of the final patch antenna was 40 mm × 46 mm. In addition to achieving miniaturization, the Defected Ground Structure (DGS) and the uniplanar Electromagnetic Band Gap (EBG) array were integrated into the patch antenna to enhance performance by suppressing the surface waves and improving the impedance matching. Simulated and measured results show that the impedance matching is very good at the operating frequencies of 868 MHz, 2.45 GHz, 4.2 GHz, and 5.8 GHz with approximate bandwidths of 7 MHz, 73 MHz, 120 MHz, and 90 MHz, respectively. The antenna was fabricated on a Rogers RO4003C substrate (thickness 1.524 mm, εr = 3.38, tanδ = 0.0027) and the Rohde & Schwarz ZVA50 Vector Network Analyzer (VNA) was used to obtain the measured results and compare them with the simulated results. Good agreement was obtained between the simulated and measured results, confirming the feasibility of the proposed antenna as a suitable candidate for compact, low-power, multiband IoT applications.

Zitieren

APA

Chigwende, T. T., Konditi, D., & Usman, A. D. (2026). Design and Development of a Miniaturized Multiband Patch Antenna Incorporating Metamaterials for IoT Applications. Engineering, Technology & Applied Science Research, 16(2), 34226-34234. https://doi.org/10.48084/etasr.17361

Vancouver

Chigwende TT, Konditi D, Usman AD. Design and Development of a Miniaturized Multiband Patch Antenna Incorporating Metamaterials for IoT Applications. Engineering, Technology & Applied Science Research. 2026;16(2):34226-34234. doi:10.48084/etasr.17361

BibTeX
@article{Chigwende2026,
  author = {Chigwende, Tatenda Thomas and Konditi, Dominic and Usman, Aliyu Danjuma},
  title = {Design and Development of a Miniaturized Multiband Patch Antenna Incorporating Metamaterials for IoT Applications},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {34226--34234},
  doi = {10.48084/etasr.17361}
}
Kostenlos starten →