Mechanical Characteristics and Metallurgical Properties of GTAW-SMAW Hybrid Welding on TMCP Steel Grade EH36 Butt Weld Parts
Engineering, Technology & Applied Science Research · 04.04.2026 · 16 (2) · 33466-33478
DOI: 10.48084/etasr.16287 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 04.04.2026. Verfasst von Sumeth Nuchim und 8 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The successful application of the Thermo-Mechanical Control Process (TMCP) in combination with the latest innovative technologies has stimulated the development of EH36 steel plates. This type of steel is often welded by Shielded Metal Arc Welding (SMAW), but there is no hybrid welding of steel sheets. The main objective of this study is to investigate the mechanical characteristics and metallurgical properties of TMCP grade EH36 steel plates of Gas Tungsten Arc Welding (GTAW) and SMAW hybrid welding processes. The steel plate used in the study measured 650 × 170 mm and had a thickness of 12 mm. Mechanical characteristics and metallurgical tests revealed deep penetration and melting between filler metal and base metal, indicating perfection between the weld metal and base metal. The hybrid GTAW and SMAW welding process produced an average maximum tensile strength of 524.35 MPa. The maximum hardness in the weld metal zone was 231 HV, and the lowest hardness in the base metal was 168 HV. The impact test results showed that the energy absorbed in the Heat-Affected Zone (HAZ) was 256.57 J, which was higher than the energy absorbed in the weld metal zone (184.34 J), indicating that the HAZ had better toughness than the weld metal zone. The microstructure of the weld metal mainly comprised acicular ferrite phase, which resulted in the weld metal being harder than the base metal.
Zitieren
APA
Nuchim, S., Bunyawanichakul, P., Kharanan, T., Limboonruang, T., Phunapai, N., Angsuseranee, N., Boonmag, V., Suwanprateep, S., & Litikorn, S. (2026). Mechanical Characteristics and Metallurgical Properties of GTAW-SMAW Hybrid Welding on TMCP Steel Grade EH36 Butt Weld Parts. Engineering, Technology & Applied Science Research, 16(2), 33466-33478. https://doi.org/10.48084/etasr.16287
Vancouver
Nuchim S, Bunyawanichakul P, Kharanan T, Limboonruang T, Phunapai N, Angsuseranee N, et al. Mechanical Characteristics and Metallurgical Properties of GTAW-SMAW Hybrid Welding on TMCP Steel Grade EH36 Butt Weld Parts. Engineering, Technology & Applied Science Research. 2026;16(2):33466-33478. doi:10.48084/etasr.16287
BibTeX
@article{Nuchim2026,
author = {Nuchim, Sumeth and Bunyawanichakul, Phacha and Kharanan, Tri and Limboonruang, Teerapath and Phunapai, Nittalin and Angsuseranee, Natchanun and Boonmag, Visanu and Suwanprateep, Sasikan and Litikorn, Sukit},
title = {Mechanical Characteristics and Metallurgical Properties of GTAW-SMAW Hybrid Welding on TMCP Steel Grade EH36 Butt Weld Parts},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {2},
pages = {33466--33478},
doi = {10.48084/etasr.16287}
}
EUVIMED