EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Examination of the Mechanical Performance of Eco-Friendly Concrete Incorporating Recycled PET and Tire Steel Fibers

Shireen H. Hassan, Laith Sh. Rasheed, Aymen J. Alsaad

Engineering, Technology & Applied Science Research · 04.04.2026 · 16 (2) · 33334-33342

DOI: 10.48084/etasr.16233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 04.04.2026. Verfasst von Shireen H. Hassan und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable construction has prompted investigations into the use of recycled materials in concrete production. This research examines the mechanical performance of eco-friendly concrete reinforced with fibers derived from post-consumer waste, including Polyethylene Terephthalate (PET) fibers from plastic bottles and recovered steel fibers from scrap tires. Polypropylene (PP) fibers and industrial micro straight steel fibers were used for comparison to evaluate the performance of recycled fibers. The research aimed to assess the viability of recycled Fiber-Reinforced Concrete (FRC) as a sustainable alternative that reduces waste and conserves natural resources. Experimental mixes were designed with two fiber volume fractions of 0.5% and 1%, for both recycled and industrial fibers. Standardized procedures were utilized for testing fresh properties (workability) and mechanical properties (compressive strength, splitting tensile strength, and flexural strength). Relative to the reference mix (normal concrete), the results revealed that the use of recycled fibers significantly improved most mechanical properties. Tire steel fibers at 1% volume fraction achieved the highest improvements, with a 42% increase in compressive strength and 77% increase in splitting tensile strength, outperforming recycled PET fibers by 22.6% and 19.4%, respectively. Additionally, incorporating tire steel fibers at a 1% volume fraction improved flexural strength by 43.8%. Recycled PET fibers and PP fibers augmented compressive and splitting tensile strengths but reduced flexural strength by 27% and 18.8%, respectively. The results indicated that recycled fibers could efficiently reinforce concrete and provide an eco-friendly alternative to conventional fibers. By reducing environmental impact, decreasing reliance on natural resources, and diverting waste from landfills, these approaches encourage sustainable construction.

Zitieren

APA

Hassan, S. H., Rasheed, L. S., & Alsaad, A. J. (2026). An Examination of the Mechanical Performance of Eco-Friendly Concrete Incorporating Recycled PET and Tire Steel Fibers. Engineering, Technology & Applied Science Research, 16(2), 33334-33342. https://doi.org/10.48084/etasr.16233

Vancouver

Hassan SH, Rasheed LS, Alsaad AJ. An Examination of the Mechanical Performance of Eco-Friendly Concrete Incorporating Recycled PET and Tire Steel Fibers. Engineering, Technology & Applied Science Research. 2026;16(2):33334-33342. doi:10.48084/etasr.16233

BibTeX
@article{Hassan2026,
  author = {Hassan, Shireen H. and Rasheed, Laith Sh. and Alsaad, Aymen J.},
  title = {An Examination of the Mechanical Performance of Eco-Friendly Concrete Incorporating Recycled PET and Tire Steel Fibers},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {33334--33342},
  doi = {10.48084/etasr.16233}
}
Kostenlos starten →