EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Mechanical Properties of Laminated Bamboo with Different Types of Adhesive and Compression Pressures

Zulmahdi Darwis, Achmad Basuki, Muhammad Yani Bhayusukma, Stefanus Adi Kristiawan, Kuncoro Diharjo, Cahyo Hadi Wibowo, Fathony Nada Saputro, Faishal Machfudz Majid

Engineering, Technology & Applied Science Research · 09.02.2026 · 16 (1) · 31349-31354

DOI: 10.48084/etasr.15374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 09.02.2026. Verfasst von Zulmahdi Darwis und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laminated bamboo, having a high strength -to-weight ratio, is getting popular for structural applications. This study evaluates how adhesive type (epoxy, polyurethane, and polyvinyl acetate) and compression pressure affect the mechanical properties and failure morphology of laminated bamboo (Dendrocalamus asper). The laminates were fabricated using the Multi Double Glue Layer (MDGL) method with cold pressing for 24 h. Tensile and shear tests were conducted in accordance with ASTM D143 to characterize mechanical behavior. Fracture surfaces were examined by macrophotography to classify failure modes. The results indicate that the epoxy adhesive provides the greatest tensile and shear strength, with failure occurring within the bamboo substrate, indicating an effective adhesive bond. Polyurethane (PUR) exhibited multiple failure modes coupled with intermediate mechanical performance, while Polyvinyl Acetate (PVAc) showed adhesive failure and offered the lowest strength. The optimum compression pressure was found to be 3.5 MPa, which allowed for effective adhesive infiltration between bamboo pores without causing excessive extrusion. Exceeding the pressure limit resulted in strength reduction due to the formation of voids, adhesive thinning, and microcracking of the substrate. Epoxy exhibited the highest Young's modulus, due to its rigid and highly cross-linked molecular structure.

Zitieren

APA

Darwis, Z., Basuki, A., Bhayusukma, M. Y., Kristiawan, S. A., Diharjo, K., Wibowo, C. H., Saputro, F. N., & Majid, F. M. (2026). The Mechanical Properties of Laminated Bamboo with Different Types of Adhesive and Compression Pressures. Engineering, Technology & Applied Science Research, 16(1), 31349-31354. https://doi.org/10.48084/etasr.15374

Vancouver

Darwis Z, Basuki A, Bhayusukma MY, Kristiawan SA, Diharjo K, Wibowo CH, et al. The Mechanical Properties of Laminated Bamboo with Different Types of Adhesive and Compression Pressures. Engineering, Technology & Applied Science Research. 2026;16(1):31349-31354. doi:10.48084/etasr.15374

BibTeX
@article{Darwis2026,
  author = {Darwis, Zulmahdi and Basuki, Achmad and Bhayusukma, Muhammad Yani and Kristiawan, Stefanus Adi and Diharjo, Kuncoro and Wibowo, Cahyo Hadi and Saputro, Fathony Nada and Majid, Faishal Machfudz},
  title = {The Mechanical Properties of Laminated Bamboo with Different Types of Adhesive and Compression Pressures},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2026},
  volume = {16},
  number = {1},
  pages = {31349--31354},
  doi = {10.48084/etasr.15374}
}
Kostenlos starten →