2⁴ Factorial Design Optimization of Process Variables for Biodiesel Production from Waste Cooking Oil
Engineering, Technology & Applied Science Research · 04.04.2026 · 16 (2) · 33228-33232
DOI: 10.48084/etasr.15231 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 04.04.2026. Verfasst von Ong Riyanto und 2 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increase of global population, leads to greater energy demand, causing resource depletion, increased emissions, and environmental degradation. The production of biodiesel from Waste Cooking Oil (WCO) offers a promising solution. However, optimizing WCO biodiesel often requires costly and complex processes such as advanced photocatalysts, microwave heating, or membrane reactors. This study uses a 2⁴ factorial experimental design to improve WCO biodiesel production based on ASTM specifications, resulting in a 96% biodiesel output at the following conditions: 40 °C, 30 min transesterification, 0.5% catalyst, and a 12:1 alcohol-to-oil molar ratio. The measured fuel properties—specific gravity, kinematic viscosity (at 40 °C), acid number, sulfated ash content, cloud point, flash point, distillation temperature, copper corrosion resistance, carbon residue content, iodine value, methyl ester content, monoglyceride content, free glycerol content, and total glycerol content—show that high-quality biodiesel can be produced from WCO under simple and economically viable conditions.
Zitieren
APA
Riyanto, O., Abdullah, M. H., & Setyono, G. (2026). 2⁴ Factorial Design Optimization of Process Variables for Biodiesel Production from Waste Cooking Oil. Engineering, Technology & Applied Science Research, 16(2), 33228-33232. https://doi.org/10.48084/etasr.15231
Vancouver
Riyanto O, Abdullah MH, Setyono G. 2⁴ Factorial Design Optimization of Process Variables for Biodiesel Production from Waste Cooking Oil. Engineering, Technology & Applied Science Research. 2026;16(2):33228-33232. doi:10.48084/etasr.15231
BibTeX
@article{Riyanto2026,
author = {Riyanto, Ong and Abdullah, M. Hasan and Setyono, Gatot},
title = {2⁴ Factorial Design Optimization of Process Variables for Biodiesel Production from Waste Cooking Oil},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {2},
pages = {33228--33232},
doi = {10.48084/etasr.15231}
}
EUVIMED