SRAM Design and Analysis Using TIGFET
Engineering, Technology & Applied Science Research · 09.02.2026 · 16 (1) · 31188-31193
DOI: 10.48084/etasr.14370 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 09.02.2026. Verfasst von S. Nagaleela und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Continuous CMOS scaling can be enabled with nanowire transistor technologies such as the Three Independent Gate FET (TIGFET). TIGFET can further reduce the leakage current compared to FinFET, using Schottky barriers, increasing the speed of operation. As technology nodes become smaller, the number of Static Random Access Memory (SRAM) cells connected to a single word line grows, leading to an increase in coupling capacitance. With this, the power consumption of the SRAM increases, and the performance is degraded. A fundamental 6-T SRAM cell was developed utilizing TIGFET on a 10nm scale, and its performance was evaluated based on stability, leakage power, average power, and delay metrics. Write delays of 40 ns and read delays of 38.7 ns show better performance compared to a MOSFET-based design. The SNM values for TIGFET-SRAM were 0.36 V, 0.25 V, and 0.32 V in hold, write, and read modes, respectively, offering good stability. The design was simulated using the Synopsys HSPICE tool, and its results were compared with those of a MOSFET-SRAM cell.
Zitieren
APA
Nagaleela, S., & Balamurugan, V. (2026). SRAM Design and Analysis Using TIGFET. Engineering, Technology & Applied Science Research, 16(1), 31188-31193. https://doi.org/10.48084/etasr.14370
Vancouver
Nagaleela S, Balamurugan V. SRAM Design and Analysis Using TIGFET. Engineering, Technology & Applied Science Research. 2026;16(1):31188-31193. doi:10.48084/etasr.14370
BibTeX
@article{Nagaleela2026,
author = {Nagaleela, S. and Balamurugan, V.},
title = {SRAM Design and Analysis Using TIGFET},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {1},
pages = {31188--31193},
doi = {10.48084/etasr.14370}
}
EUVIMED