MICROSTRUCTURAL FEATURES OF TECHNOGENIC RAW MATERIALS INTENDED FOR FE-CR-MN-SI ALLOY PRODUCTION
Science and Technology of Kazakhstan · 30.06.2026 · (2, 2026) · 313-324
DOI: 10.48081/bgqf2233 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science and Technology of Kazakhstan, online erschienen am 30.06.2026. Verfasst von A. Zhakan.
Abstract (Originalsprache)
This study presents a comparative SEM/EDS investigation of three technogenic materials generated in ferrous metallurgy: chromium-bearing aspiration dust, iron-manganese ore fines, and coal sludge. Unlike conventional studies that mainly consider these materials separately for recycling and agglomeration applications, the present work evaluates their microstructural compatibility and potential combined utilization in Fe-Cr-Mn-Si alloy production. The objective was to determine their morphological characteristics and elemental distribution in order to assess their suitability as secondary metallurgical raw materials. The samples were examined using scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). The results revealed pronounced structural and chemical heterogeneity in all investigated materials. Chromium-containing dust consists of fine agglomerated particles and contains oxide, silicate, and Cr-Fe spinel-type phases enriched with Mg and Al. Iron-manganese ore fines exhibit alternating oxide and silicate regions, with Fe and Mn predominantly occurring as oxide phases, while Si and Al are associated with aluminosilicates. Coal sludge demonstrates a mixed structure composed of carbon-rich organic matter and mineral inclusions represented by aluminosilicate, quartz, and carbonate phases containing Si, Al, Mg, Ca, Fe. The obtained results indicate that these technogenic materials are multiphase and chemically complex systems. After appropriate preparation and agglomeration treatment, they may be considered promising secondary raw materials for Fe-Cr-Mn-Si alloy production. Keywords: technogenic wastes, chromium-bearing aspiration dust, iron-manganese ore fines; coal sludge; microstructure; scanning electron microscopy (SEM); waste utilization; ferroalloys.
Zitieren
APA
Zhakan, A. (2026). MICROSTRUCTURAL FEATURES OF TECHNOGENIC RAW MATERIALS INTENDED FOR FE-CR-MN-SI ALLOY PRODUCTION. Science and Technology of Kazakhstan, 313-324. https://doi.org/10.48081/bgqf2233
Vancouver
Zhakan A. MICROSTRUCTURAL FEATURES OF TECHNOGENIC RAW MATERIALS INTENDED FOR FE-CR-MN-SI ALLOY PRODUCTION. Science and Technology of Kazakhstan. 2026:313-324. doi:10.48081/bgqf2233
BibTeX
@article{Zhakan2026,
author = {Zhakan, A.},
title = {MICROSTRUCTURAL FEATURES OF TECHNOGENIC RAW MATERIALS INTENDED FOR FE-CR-MN-SI ALLOY PRODUCTION},
journal = {Science and Technology of Kazakhstan},
year = {2026},
number = {2, 2026},
pages = {313--324},
doi = {10.48081/bgqf2233}
}
EUVIMED