TRIBOCORROSION PROPERTIES OF ALLOY STEEL BORIDE LAYERS AFTER THERMOCYCLIC ELECTROLYTIC-PLASMA BORIDING
Science and Technology of Kazakhstan · 30.06.2026 · (2, 2026) · 240-255
DOI: 10.48081/bgqf2228 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science and Technology of Kazakhstan, online erschienen am 30.06.2026. Verfasst von L. G. Sulyubayeva und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This article presents the results of a study of the tribocorrosion resistance of 30KhGSA alloy steel after diffusion thermocyclic electrolytic-plasma boriding (DTEPB). The aim of the study is to evaluate the influence of DTEPB parameters on the formation of the surface layer structure and its behavior under tribocorrosion conditions. The study utilized tribocorrosion tests with simultaneous recording of the friction coefficient and electrochemical parameters, potentiodynamic analysis, as well as scanning electron microscopy and energy-dispersive analysis. It was found that the treatment leads to the formation of a dense boride layer, which significantly increases the material’s resistance to tribocorrosion destruction. Optimum characteristics are achieved with a 30 % sodium tetraborate content in the electrolyte: the wear rate is reduced to 1.036×10⁻⁴ mm²/N m, and the corrosion rate is reduced to 0.00685 mm/year. It has been shown that increasing the number of thermal cycles reduces the defectiveness of the boride layer and enhances its protective properties. The formation of a two-layer structure (oxide and boride layers) reduces the friction coefficient and limits the development of tribocorrosion processes. The obtained results confirm the effectiveness of DTEPB as a method for increasing the tribocorrosion resistance of alloy steels. Keywords: electrolytic-plasma boriding, tribocorrosion, alloy steel, friction coefficient, wear rate.
Zitieren
APA
Sulyubayeva, L. G., Buitkenov, D. B., Baizhan, D. R., Berdimuratov, N. E., & Alibekova, B. A. (2026). TRIBOCORROSION PROPERTIES OF ALLOY STEEL BORIDE LAYERS AFTER THERMOCYCLIC ELECTROLYTIC-PLASMA BORIDING. Science and Technology of Kazakhstan, 240-255. https://doi.org/10.48081/bgqf2228
Vancouver
Sulyubayeva LG, Buitkenov DB, Baizhan DR, Berdimuratov NE, Alibekova BA. TRIBOCORROSION PROPERTIES OF ALLOY STEEL BORIDE LAYERS AFTER THERMOCYCLIC ELECTROLYTIC-PLASMA BORIDING. Science and Technology of Kazakhstan. 2026:240-255. doi:10.48081/bgqf2228
BibTeX
@article{Sulyubayeva2026,
author = {Sulyubayeva, L. G. and Buitkenov, D. B. and Baizhan, D. R. and Berdimuratov, N. E. and Alibekova, B. A.},
title = {TRIBOCORROSION PROPERTIES OF ALLOY STEEL BORIDE LAYERS AFTER THERMOCYCLIC ELECTROLYTIC-PLASMA BORIDING},
journal = {Science and Technology of Kazakhstan},
year = {2026},
number = {2, 2026},
pages = {240--255},
doi = {10.48081/bgqf2228}
}
EUVIMED