"STUDY OF THE FORMATION OF SECONDARY CONTACT STRUCTURE "
Science and Technology of Kazakhstan · 31.03.2026 · 210-220
DOI: 10.48081/bgqf1919 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science and Technology of Kazakhstan, online erschienen am 31.03.2026. Verfasst von G. M. Tussupbekova und 4 weiteren Autor:innen.
Abstract (Originalsprache)
"Research conducted in the conditions of domestic machine-building industries has shown that one of the main factors leading to an increase in the cost of machining parts is the excessive consumption of metal-cutting tools due to their premature wear. The solution to this problem may be the development of a method to increase the wear resistance and durability of a metal-cutting tool, as newly acquired before it is used in mechanical processing, as the after overworking the restored one. This article presents the results of a study on the formation of a hardened secondary contact structure on the working surface of a tool after running-in, which is recommended as a way to increase the wear resistance and durability of a metal-cutting tool. It was found that the optimal pre-working modes of the tools provide the best deformation and thermal conditions for hardening the cutting part of the tools. The results of the study showed that, indeed, after running-in, a hardened layer forms on the cutting part of metal-cutting tools. It was found that the thickness of the hardened layer of the cutting part of the disk modular milling cutter is 0.41 mm, the cup cutter is 0.33 mm and the end milling cutter is 0.37 mm. A comparison of the results of experimental, computer and metallographic studies confirmed that after running-in, the cutting part of the tool hardens. Keywords: Running-in, metal cutting tool, wear, hardened layer, secondary contact structure, microstructure, temperature.
Zitieren
APA
Tussupbekova, G. M., Cieślik, J., Tulieva, N. B., Tazhenova, G. D., & Oryntaeva, G. Z. (2026). "STUDY OF THE FORMATION OF SECONDARY CONTACT STRUCTURE ". Science and Technology of Kazakhstan, 210-220. https://doi.org/10.48081/bgqf1919
Vancouver
Tussupbekova GM, Cieślik J, Tulieva NB, Tazhenova GD, Oryntaeva GZ. "STUDY OF THE FORMATION OF SECONDARY CONTACT STRUCTURE ". Science and Technology of Kazakhstan. 2026:210-220. doi:10.48081/bgqf1919
BibTeX
@article{Tussupbekova2026,
author = {Tussupbekova, G. M. and Cieślik, J. and Tulieva, N. B. and Tazhenova, G. D. and Oryntaeva, G. Zh.},
title = {"STUDY OF THE FORMATION OF SECONDARY CONTACT STRUCTURE "},
journal = {Science and Technology of Kazakhstan},
year = {2026},
pages = {210--220},
doi = {10.48081/bgqf1919}
}
EUVIMED