DESIGN AND DEVELOPMENT OF BALL TRACTION DRIVE SYSTEM
Science and Technology of Kazakhstan · 2024
DOI: 10.48081/ahmr1201 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science and Technology of Kazakhstan, 2024. Verfasst von D. A. Otegen und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This project presents a three-stage ball traction drive for electric vehicles, providing a remarkable speed ratio of 1/27. The geometric and kinematic aspects were carefully analyzed and calculated manually and then verified using Recurdyn software at different rotational speeds (100, 500, 1000 rpm). To prevent ball displacement at higher rotational speeds, a strategy involving a small gap between the intermediate balls was employed. For material selection, “Gear-Steel” was favored because of its high yield strength complemented by thrust bearing integration. The static equilibrium analysis was performed manually to provide insight into the relationship between the preload forces, which were further visualized using MATLAB graphs. The rolling efficiency for each stage was calculated separately. The design involved connecting three circular flanges using 18 pins and 18 heavy hex bolts. Modeling in ANSYS revealed a maximum equivalent stress of 737 MPa in the third stage. Finally, Solidworks helped optimize the topology, resulting in a noticeable 14.5 % reduction in overall volume. Keywords: Ball traction drive, gearbox, transmission system, continuously variable transmission, collision.
Zitieren
APA
Otegen, D. A., Tanzharykov, P. A., & Suleimenov, N. S. (2024). DESIGN AND DEVELOPMENT OF BALL TRACTION DRIVE SYSTEM. Science and Technology of Kazakhstan. https://doi.org/10.48081/ahmr1201
Vancouver
Otegen DA, Tanzharykov PA, Suleimenov NS. DESIGN AND DEVELOPMENT OF BALL TRACTION DRIVE SYSTEM. Science and Technology of Kazakhstan. 2024. doi:10.48081/ahmr1201
BibTeX
@article{Otegen2024,
author = {Otegen, D. A. and Tanzharykov, P. A. and Suleimenov, N. S},
title = {DESIGN AND DEVELOPMENT OF BALL TRACTION DRIVE SYSTEM},
journal = {Science and Technology of Kazakhstan},
year = {2024},
doi = {10.48081/ahmr1201}
}
EUVIMED