Extraction of Coconut Coir-Derived Lignin and Fabrication of Electrospun Nanofibers of Nylon 6/Lignin Blends
Trends in Sciences · 20.07.2026 · 23 (12) · 14097
DOI: 10.48048/tis.2026.14097 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 20.07.2026. Verfasst von Supapohn Pohnanothai und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This research introduces a sustainable and integrated approach for utilizing lignin derived from coconut coir, employing a deep eutectic solvent (DES) system to synthesize advanced nanofibers. The study methodically optimized lignin extraction, emphasizing yield, antioxidant capacity, structural attributes (as determined by FTIR and XRD analyses), and antibacterial efficacy. The optimal extraction parameters were established as 80 °C for a duration of 8 h (C80–8). Consequently, this methodology achieved the highest lignin recovery rate (15.95%), while simultaneously maintaining the inherent structural integrity and mitigating condensation. Structural analyses confirmed the retention of critical functional groups and a largely amorphous configuration. The C80–8 lignin demonstrated enhanced antioxidant activity (IC50 = 30 µg/mL) and exhibited significantly improved antibacterial efficacy against both Staphylococcus aureus and Escherichia coli, in contrast to Kraft lignin (KL). Following this, the extracted lignin was integrated into a Nylon 6 matrix and subsequently processed into composite nanofibers via needleless electrospinning. The impact of lignin loading was methodically evaluated through morphological and mechanical characterization. SEM analysis revealed that a 5 wt% lignin loading (N/CL5) produced uniform, bead-free nanofibers with an average diameter of 104 nm, indicating that the conditions for rheology and electrospinning were appropriately optimized. This formulation also had the best mechanical properties, with higher tensile strength, elongation at break, and Youngʼs modulus. The observed results arose from the interactions between lignin and the polymer matrix, specifically the formation of hydrogen bonds. Furthermore, the N/CL5 nanofibers showed significant antibacterial activity against S. aureus, surpassing the effectiveness of both pure Nylon 6 and KL composites. The enhanced functionality of DES-extracted lignin is due to the large number of phenolic hydroxyl groups that were preserved. The findings generally indicate that lignin derived from DES offers two key advantages: Its potential as a reinforcing agent and its utility as a bioactive additive. Consequently, this approach presents a scalable and environmentally sound method for converting lignocellulosic agricultural waste into valuable materials suitable for biomedical, protective, and filtration applications. HIGHLIGHTS Lignin was extracted from coconut coir using a deep eutectic solvent (DES) system with optimized conditions. The key lignin functional groups were confirmed by FTIR and XRD analysis. The extracted lignin exhibited antioxidant and antibacterial activities and was effectively incorporated into Nylon 6 nanofibers via needleless electrospinning. Lignin-loaded Nylon 6 nanofibers demonstrated improved mechanical properties and enhanced antibacterial performance. GRAPHICAL ABSTRACT
Zitieren
APA
Pohnanothai, S., & Wutticharoenmongkol, P. (2026). Extraction of Coconut Coir-Derived Lignin and Fabrication of Electrospun Nanofibers of Nylon 6/Lignin Blends. Trends in Sciences, 23(12), 14097. https://doi.org/10.48048/tis.2026.14097
Vancouver
Pohnanothai S, Wutticharoenmongkol P. Extraction of Coconut Coir-Derived Lignin and Fabrication of Electrospun Nanofibers of Nylon 6/Lignin Blends. Trends in Sciences. 2026;23(12):14097. doi:10.48048/tis.2026.14097
BibTeX
@article{Pohnanothai2026,
author = {Pohnanothai, Supapohn and Wutticharoenmongkol, Patcharaporn},
title = {Extraction of Coconut Coir-Derived Lignin and Fabrication of Electrospun Nanofibers of Nylon 6/Lignin Blends},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {12},
pages = {14097},
doi = {10.48048/tis.2026.14097}
}
EUVIMED