Comparative study of Sugarcane Bagasse Pyrolysis Methods on Phosphate Ion Adsorption Efficiency: Optimization with BBD-RSM
Trends in Sciences · 20.04.2026 · 23 (10) · 13079
DOI: 10.48048/tis.2026.13079 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 20.04.2026. Verfasst von Nabila Eka Yuningsih und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Utilization of sugarcane bagasse waste as an adsorbent because it has a high silica content, is environmentally friendly, and has a high surface area. Sugarcane bagasse is used as an adsorbent with oxygen pyrolysis (SB@PO) and N2 (SB@PN) methods, both of which are applied to reduce phosphate waste in water. The adsorption method was chosen to reduce phosphate levels in wastewater. Adsorption parameters include adsorbent mass, contact time, and initial concentration of phosphate solution. Response Surface Methodology (RSM) and Box-Behnken design (BBD) methods are used to optimize the process. Phosphate levels are measured using Differential Pulse Voltammetry (DPV). The characterizations carried out include: FTIR, XRD, FESEM-EDX, and N2 adsorption-desorption. SB@PO obtained material with a crystalline structure and rich in silica while SB@PN obtained material rich in carbon and amorphous structure. The adsorption optimization results showed that SB@PO was superior to SB@PN, namely the percentage removal and adsorption capacity were 95.97% and 43.48 mg/g for SB@PO, while SB@PN was optimal with the percentage removal and adsorption capacity of 65.75% and 2.2×10−4 mg/g, respectively. HIGHLIGHTS Sugarcane bagasse was transformed into SB@PO and SB@PN adsorbent for phosphate adsorption. The different pyrolysis method with variations in oxygen (SB@PO) at 500 °C and nitrogen (SB@PN) at 400 °C. The specific surface area of SB@PO at 236.971 m2/g and SB@PN at 0.139 m2/g. The phosphate removal uses the adsorption method with measurements using the voltammetry method, optimized using the BBD-RSM approach. The phosphate recovery with SB@PO adsorbent of 95.97% and SB@PN adsorbent of 65.75%. SB@PO provides the best adsorption performances with an adsorption capacity of 43.48 mg/g compared to SB@PN of 2.2×10−4 mg/g. GRAPHICAL ABSTRACT
Zitieren
APA
Yuningsih, N. E., Suprapto, S., & Ni’mah, Y. L. (2026). Comparative study of Sugarcane Bagasse Pyrolysis Methods on Phosphate Ion Adsorption Efficiency: Optimization with BBD-RSM. Trends in Sciences, 23(10), 13079. https://doi.org/10.48048/tis.2026.13079
Vancouver
Yuningsih NE, Suprapto S, Ni’mah YL. Comparative study of Sugarcane Bagasse Pyrolysis Methods on Phosphate Ion Adsorption Efficiency: Optimization with BBD-RSM. Trends in Sciences. 2026;23(10):13079. doi:10.48048/tis.2026.13079
BibTeX
@article{Yuningsih2026,
author = {Yuningsih, Nabila Eka and Suprapto, Suprapto and Ni’mah, Yatim Lailun},
title = {Comparative study of Sugarcane Bagasse Pyrolysis Methods on Phosphate Ion Adsorption Efficiency: Optimization with BBD-RSM},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {10},
pages = {13079},
doi = {10.48048/tis.2026.13079}
}
EUVIMED