Stepwise Production of Potential Biolubricant Base Stock from Sunflower Oil: Hydrolysis, Fatty Acid Separation and Esterification
Trends in Sciences · 05.04.2026 · 23 (9) · 13029
DOI: 10.48048/tis.2026.13029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 05.04.2026. Verfasst von Muhammad Muizzuddin Khairuddin und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This study focuses on the synthesis of sunflower oil unsaturated fatty acids trimethylolpropane ester (SFOUFATMPE) as a potential biolubricant base stock. Sunflower oil was first hydrolyzed to obtain sunflower oil fatty acids (SFOFA) with a high yield of 96%, followed by low-temperature methanol crystallization to separate unsaturated fatty acids (SFOUFA) from saturated fatty acids (SFOSFA). The separation process produced 98.89% SFOUFA with a yield of 86.32%, while the saturated fraction (SFOSFA) was obtained with 100% purity and a yield of 13.68%. The SFOUFA fraction was then esterified with trimethylolpropane (TMP) in the presence of sulfuric acid as a catalyst to produce sunflower oil unsaturated fatty acids trimethylolpropane ester (SFOUFATMPE). The reaction was carried out with a mole ratio of 4:1 (SFOFA:TMP), 1.13% catalyst at 154 °C for 6 h. The synthesized SFOUFATMPE was characterized using FTIR, and NMR, confirming the successful formation of polyol esters. The SFOUFATMPE exhibited desirable physicochemical properties, including a high flash point (290 °C), low pour point (–18 °C), and good oxidative stability (24 min). These results demonstrate that SFOUFATMPE derived from sunflower oil is a promising and sustainable alternative to mineral oil-based lubricants. HIGHLIGHTS A high-purity unsaturated fatty acid fraction (98.89%) was obtained from sunflower oil via hydrolysis and methanol crystallization. High-yield unsaturated fatty acids (86.32%) were obtained for further conversion into a biolubricant base stock. Sunflower oil unsaturated fatty acids trimethylolpropane ester (SFOUFATMPE) was synthesized via esterification with trimethylolpropane using sulfuric acid as a catalyst. Structural analysis using FTIR and NMR confirmed the successful formation of the polyol ester. The produced biolubricant exhibited excellent properties, including a high flash point (290 °C), low pour point (-18 °C), and good oxidative stability, indicating its potential as a sustainable alternative to mineral oil-based lubricants. GRAPHICAL ABSTRACT
Zitieren
APA
Khairuddin, M. M., Abdullah, A., Ghazali, S. A. I. S. M., Fatimah, I., Wafti, S. A., & Nor, N. M. (2026). Stepwise Production of Potential Biolubricant Base Stock from Sunflower Oil: Hydrolysis, Fatty Acid Separation and Esterification. Trends in Sciences, 23(9), 13029. https://doi.org/10.48048/tis.2026.13029
Vancouver
Khairuddin MM, Abdullah A, Ghazali SAISM, Fatimah I, Wafti SA, Nor NM. Stepwise Production of Potential Biolubricant Base Stock from Sunflower Oil: Hydrolysis, Fatty Acid Separation and Esterification. Trends in Sciences. 2026;23(9):13029. doi:10.48048/tis.2026.13029
BibTeX
@article{Khairuddin2026,
author = {Khairuddin, Muhammad Muizzuddin and Abdullah, Asiah and Ghazali, Sheikh Ahmad Izaddin Sheikh Mohd and Fatimah, Is and Wafti, Sulihatimarsyila Abd and Nor, Nurazira Mohd},
title = {Stepwise Production of Potential Biolubricant Base Stock from Sunflower Oil: Hydrolysis, Fatty Acid Separation and Esterification},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {9},
pages = {13029},
doi = {10.48048/tis.2026.13029}
}
EUVIMED