Sustainable EMI Shielding Composites from Recycled PE/PP and Coconut Shell–Derived Activated Carbon
Trends in Sciences · 10.03.2026 · 23 (7) · 12852
DOI: 10.48048/tis.2026.12852 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 10.03.2026. Verfasst von Waroonsiri Jakrabutr und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This work explores the use of coconut-shell-derived activated carbon (AC) to improve the properties of recycled polyethylene/polypropylene (PE/PP) composites. AC was added at 0 - 25 wt% using melt blending followed by compression moulding. As the AC content increased, the composite density rose from 0.8987 to 0.9627 g/cm³, while the melt flow index dropped from 58.29 to 17.47 g/10 min, reflecting reduced chain mobility and stronger interactions between the filler and polymer matrix. Mechanical properties also improved, with the tensile modulus and tensile strength reaching 1643 and 16.8 MPa, together with a noticeable increase in ductility. DSC analysis showed two melting transitions at around 128 and 163 °C, and both the crystallization temperature (122.24 °C) and crystallization enthalpy (574 J/g at 5 wt% AC) increased, confirming that AC acts as an effective nucleating agent. The EMI-shielding performance of the composites improved steadily with AC loading. The best attenuation was obtained at 25 wt% AC, where the transmitted signal reached –18.64 dBµV at 3.82 GHz. This enhancement is attributed to the development of semi-continuous conductive pathways and stronger dielectric loss mechanisms. Overall, the results show that incorporating bio-based AC into recycled PE/PP is a practical and sustainable way to produce lightweight, low-cost composites with improved mechanical performance and effective EMI-shielding capability for use in electronic and packaging applications. HIGHLIGHTS Recycled PE/PP composites reinforced with bio-derived activated carbon were successfully fabricated. AC addition improved tensile strength, modulus, toughness, and crystallinity. EMI-shielding performance increased with AC loading, reaching –18.64 dBµV at 3.82 GHz. AC served as an efficient nucleating agent, raising crystallization temperature and enthalpy. The composites offer a sustainable, low-cost, lightweight solution for EMI-shielding applications. GRAPHICAL ABSTRACT
Zitieren
APA
Jakrabutr, W., Sungsanit, K., Mathurosemontri, S., Phansroy, N., Ampha, P., Sukhawipat, N., Yuennan, J., & Chailad, W. (2026). Sustainable EMI Shielding Composites from Recycled PE/PP and Coconut Shell–Derived Activated Carbon. Trends in Sciences, 23(7), 12852. https://doi.org/10.48048/tis.2026.12852
Vancouver
Jakrabutr W, Sungsanit K, Mathurosemontri S, Phansroy N, Ampha P, Sukhawipat N, et al. Sustainable EMI Shielding Composites from Recycled PE/PP and Coconut Shell–Derived Activated Carbon. Trends in Sciences. 2026;23(7):12852. doi:10.48048/tis.2026.12852
BibTeX
@article{Jakrabutr2026,
author = {Jakrabutr, Waroonsiri and Sungsanit, Kullawadee and Mathurosemontri, Suchalinee and Phansroy, Nichanan and Ampha, Phongsuk and Sukhawipat, Nathapong and Yuennan, Jureeporn and Chailad, Wichain},
title = {Sustainable EMI Shielding Composites from Recycled PE/PP and Coconut Shell–Derived Activated Carbon},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {7},
pages = {12852},
doi = {10.48048/tis.2026.12852}
}
EUVIMED