Surface Modification of Banana Pseudo-Stem Cellulose Using Fenton Oxidation: Adsorption Kinetics, Isotherms, and Optimization
Trends in Sciences · 20.03.2026 · 23 (8) · 12722
DOI: 10.48048/tis.2026.12722 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 20.03.2026. Verfasst von Quynh Anh Nguyen Thi und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Surface-modified cellulose derived from banana pseudo-stem (BMC), as an abundant, cost-effective, and environmentally-friendly adsorbent, was used to remove methylene blue dye (MB) from water. At first, the banana pseudo-stem underwent several physicochemical treatments to isolate cellulose and followed by Fenton oxidation to introduce desired functional groups onto its surface. The adsorbent was characterized by SEM, TEM, EDS, FTIR, and XRD for understanding its characteristics. Next, the effect of adsorption time, pH, initial concentration, and temperature for MB adsorption was investigated in batch experiments. The MB adsorption kinetic and equilibrium data were consistently explained by pseudo-second-order and Langmuir models, respectively, with a calculated maximum adsorption capacity of 56.6 mg/g. Thermodynamic studies indicated that the adsorption is an exothermic and spontaneous process. In an optimization study, response surface methodology based on the Box-Behnken method was applied and revealed that under the optimal condition (contact time of 151 min, pH of 6.9, and initial concentration of 22.6 mg/L), the maximum removal efficiency was 99.7%. This study suggests a promising strategy to prepare an economical and biodegradable adsorbent from agricultural residue for efficient purification of wastewater. HIGHLIGHTS Waste banana pseudo-stem-derived cellulose as an efficient adsorbent for methylene blue removal MB adsorption followed pseudo-second-order kinetics and Langmuir isotherms: chemical sorption Box-Behnken response surface methodology optimized contact time, pH, and initial concentration Optimal conditions reached at 151 min, pH 6.9, and 22.6 mg/L for maximum MB removal GRAPHICAL ABSTRACT
Zitieren
APA
Thi, Q. A. N., Nguyen, N. H., Phan, P. T., Thi, T. N., Le, T. T., & Nguyen, T. T. (2026). Surface Modification of Banana Pseudo-Stem Cellulose Using Fenton Oxidation: Adsorption Kinetics, Isotherms, and Optimization. Trends in Sciences, 23(8), 12722. https://doi.org/10.48048/tis.2026.12722
Vancouver
Thi QAN, Nguyen NH, Phan PT, Thi TN, Le TT, Nguyen TT. Surface Modification of Banana Pseudo-Stem Cellulose Using Fenton Oxidation: Adsorption Kinetics, Isotherms, and Optimization. Trends in Sciences. 2026;23(8):12722. doi:10.48048/tis.2026.12722
BibTeX
@article{Thi2026,
author = {Thi, Quynh Anh Nguyen and Nguyen, Nhat Huy and Phan, Phuoc Toan and Thi, Thuy Nguyen and Le, Tri Thich and Nguyen, Trung Thanh},
title = {Surface Modification of Banana Pseudo-Stem Cellulose Using Fenton Oxidation: Adsorption Kinetics, Isotherms, and Optimization},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {8},
pages = {12722},
doi = {10.48048/tis.2026.12722}
}
EUVIMED