Temperature-Dependent Microstructure and Lattice Distortion in Pure Magnesium Investigated by Neutron and X-ray Diffraction
Trends in Sciences · 01.01.2026 · 23 (5) · 11876
DOI: 10.48048/tis.2026.11876 ↗Kurz gefasst
Fachartikel in der Zeitschrift Trends in Sciences, online erschienen am 01.01.2026. Verfasst von Muhammad Rifai und 12 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This study investigates the microstructural evolution and residual stress behavior of pure magnesium processed by Accumulative Roll Bonding (ARB) at 250 and 350 °C for up to 4 cycles. Characterization using Optical Microscopy, SEM, XRD, and Neutron Diffraction revealed significant grain refinement, with the smallest grain size of 6.591 μm in the Mg 3A sample (250 °C, 3 cycles). XRD indicated texture evolution with enhanced (002) orientation and increased lattice strain (0.21816%), while neutron diffraction confirmed compressive residual stress, reaching 138.275 MPa in Mg 3A. Lower processing temperature promoted finer grains and higher residual stress, whereas higher temperature facilitated recovery and stress relaxation. The combined use of XRD and neutron diffraction provided complementary insights into surface and bulk changes. Unlike conventional approaches that rely solely on XRD, this study uniquely integrates neutron diffraction to probe bulk stresses, marking a novel contribution in the characterization of ARB-processed pure magnesium. This approach represents a novel contribution in characterizing ARB-processed pure magnesium. ARB at 250 °C for 3 cycles was identified as the optimal condition to enhance microstructure and manage residual stress in pure magnesium. HIGHLIGHTS Significant grain refinement achieved through Accumulative Roll Bonding processing at lower temperature, demonstrating effective microstructural refinement through severe plastic deformation Novel integration of neutron diffraction with X-ray diffraction provides complementary insights into both bulk and surface residual stress behavior, marking a significant advancement over conventional approaches Lower processing temperature promoted higher compressive residual stress and finer grain structure, while higher temperature facilitated recovery mechanisms and stress relaxation Enhanced texture evolution with basal plane orientation and increased lattice strain indicating substantial crystallographic changes that influence mechanical behavior Optimal processing conditions identified for simultaneously enhancing microstructure refinement and managing residual stress in pure magnesium for lightweight structural applications GRAPHICAL ABSTRACT
Zitieren
APA
Rifai, M., Pratama, M. I., Muhammad, A. A., Prasetya, A. D., Mujamilah, M., Diah, F. I., Dwiatmaja, A., Permana, F. S., Wibowo, K., Suharni, S., Taufik, T., Mulyani, E., & Aziz, I. (2026). Temperature-Dependent Microstructure and Lattice Distortion in Pure Magnesium Investigated by Neutron and X-ray Diffraction. Trends in Sciences, 23(5), 11876. https://doi.org/10.48048/tis.2026.11876
Vancouver
Rifai M, Pratama MI, Muhammad AA, Prasetya AD, Mujamilah M, Diah FI, et al. Temperature-Dependent Microstructure and Lattice Distortion in Pure Magnesium Investigated by Neutron and X-ray Diffraction. Trends in Sciences. 2026;23(5):11876. doi:10.48048/tis.2026.11876
BibTeX
@article{Rifai2026,
author = {Rifai, Muhammad and Pratama, Muhammad Ivan and Muhammad, Azza Alifa and Prasetya, Ahadi Damar and Mujamilah, Mujamilah and Diah, Frida Iswinning and Dwiatmaja, Agus and Permana, Fajar Sidik and Wibowo, Kurnia and Suharni, Suharni and Taufik, Taufik and Mulyani, Emy and Aziz, Ihwanul},
title = {Temperature-Dependent Microstructure and Lattice Distortion in Pure Magnesium Investigated by Neutron and X-ray Diffraction},
journal = {Trends in Sciences},
year = {2026},
volume = {23},
number = {5},
pages = {11876},
doi = {10.48048/tis.2026.11876}
}
EUVIMED