Testing and Modeling of Embedded Stainless Steel-Glass Connections
Challenging Glass Conference Proceedings · 15.06.2026 · 10
DOI: 10.47982/cgc.10.759 ↗Kurz gefasst
Fachartikel in der Zeitschrift Challenging Glass Conference Proceedings, online erschienen am 15.06.2026. Verfasst von Rohola Rahnavard und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Embedded stainless steel–glass connections are widely used in transparent structures, but their mechanical behaviour depends on stress transfer through polymer interlayers. This study investigates an embedded stainless steel–glass detail with a polyvinyl butyral (PVB) interlayer and evaluates a finite-element model in Abaqus. Three laboratory tests were performed on identical specimens under monotonic loading. All specimens failed by delamination at the embedded interface. The model treats glass and steel as linear elastic, the PVB as a deformable interlayer, and uses an adhesive-zone (traction–separation) law to capture damage initiation and evolution. Geometric nonlinearity and contact simulate separation and post-peak behaviour. Predictions were compared with measurements, including global force–displacement response. The simulation reproduced stiffness, peak load, and post-peak softening across all three tests and correctly localised damage along the embedded edge. This close correspondence demonstrates the reliability of the modelling technique for assessing embedded steel–glass connections with PVB interlayers. The results provide a validated basis for parametric studies and predictions of capacity and failure modes in laminated glass assemblies.
Zitieren
APA
Rahnavard, R., Inca-Cabrera, E., Jordão, S., & Rebelo, C. (2026). Testing and Modeling of Embedded Stainless Steel-Glass Connections. Challenging Glass Conference Proceedings, 10. https://doi.org/10.47982/cgc.10.759
Vancouver
Rahnavard R, Inca-Cabrera E, Jordão S, Rebelo C. Testing and Modeling of Embedded Stainless Steel-Glass Connections. Challenging Glass Conference Proceedings. 2026;10. doi:10.47982/cgc.10.759
BibTeX
@article{Rahnavard2026,
author = {Rahnavard, Rohola and Inca-Cabrera, Eliana and Jordão, Sandra and Rebelo, Carlos},
title = {Testing and Modeling of Embedded Stainless Steel-Glass Connections},
journal = {Challenging Glass Conference Proceedings},
year = {2026},
volume = {10},
doi = {10.47982/cgc.10.759}
}
EUVIMED