EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cold-Bent Thin-Glass IGUs

Koen van Deurzen, Mauro Overend, Marcel Bilow

Challenging Glass Conference Proceedings · 15.06.2026 · 10

DOI: 10.47982/cgc.10.672 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Challenging Glass Conference Proceedings, online erschienen am 15.06.2026. Verfasst von Koen van Deurzen und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent developments in thin glass technology and flexible edge spacers present an opportunity to addresses notable fabrication challenges in conventional curved insulated glazing units, namely the undesirable visual distortions arising from hot bending the glass and the limited curvatures allowed by the glass strength. This study investigates the structural feasibility of flexible insulated glazing units (IGUs) incorporating chemically strengthened thin glass and a flexible spacer system, with the objective of enabling higher cold-bending curvatures than those achievable with conventional glass façades. And in doing so, the curvature imposed on the thin glass also provides the necessary stiffness to resist loads without excessive deflections. A combined methodological framework was adopted in this study, comprising finite element modelling to predict stress–strain behavior under controlled single-corner bending, alongside experimental validation through prototype fabrication and destructive testing. With additional material-scale mechanical tests to improve the accuracy of the numerical models. It was found that thin-glass IGUs can achieve a curvature ratio of 0.112, representing a 420% improvement on fully tempered IGUs with standard thickness glass. These findings demonstrate that thin-glass assemblies are capable of accommodating substantial geometric flexibility without compromising mechanical integrity, thereby reducing reliance on hot-bent glass in architectural applications.

Zitieren

APA

Deurzen, K. V., Overend, M., & Bilow, M. (2026). Cold-Bent Thin-Glass IGUs. Challenging Glass Conference Proceedings, 10. https://doi.org/10.47982/cgc.10.672

Vancouver

Deurzen KV, Overend M, Bilow M. Cold-Bent Thin-Glass IGUs. Challenging Glass Conference Proceedings. 2026;10. doi:10.47982/cgc.10.672

BibTeX
@article{Deurzen2026,
  author = {Deurzen, Koen van and Overend, Mauro and Bilow, Marcel},
  title = {Cold-Bent Thin-Glass IGUs},
  journal = {Challenging Glass Conference Proceedings},
  year = {2026},
  volume = {10},
  doi = {10.47982/cgc.10.672}
}
Kostenlos starten →