EUVIMEDEUVIMED entdecken
Crossref

Comparative flexural performance of primitive, diamond, and gyroid TPMS concrete beams

Tuan Tran Anh, Hai Hoang Viet, Quan Nguyen Hoang, Thao Tran Thi Bich, Viet Tran Bao

Transport and Communications Science Journal · 13.08.2026 · 77 (9) · 1170-1184

DOI: 10.47869/tcsj.77.9.4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 13.08.2026. Verfasst von Tuan Tran Anh und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the nonlinear flexural behaviour of Primitive, Diamond, and Gyroid triply periodic minimal surface (TPMS) concrete beams using the Concrete Damaged Plasticity model in Abaqus/Standard. All beams had identical external dimensions, C30/37 concrete properties, and a nominal solid volume fraction of 50%, allowing topology to remain the main variable. A combined geometric-resolution and mesh sensitivity study was conducted, and the R24 models were adopted as the common comparative reference. Structural performance was evaluated using peak load, secant stiffness, accumulated external work up to a common post-peak load threshold, mass-normalized accumulated work, normalized deformation index, and damage distributions. Primitive exhibited the highest secant stiffness (46.5 kN/mm) and peak load (5.12 kN) but showed localized damage, rapid post-peak load reduction, and the lowest accumulated work (0.93 J). Diamond achieved a slightly lower peak load (4.77 kN) while providing the highest accumulated work (1.85 J) and mass-normalized accumulated work (0.39 J/kg), indicating a favorable balance between strength and work accumulation under the adopted numerical assumptions. Gyroid showed the lowest peak load (3.56 kN) but the highest normalized deformation index (2.16). The results demonstrate a clear topology-dependent trade-off among stiffness, strength, accumulated work, and deformation capacity, and provide preliminary numerical insights for future experimental validation and investigation of load-bearing, permeable TPMS concrete structures.

Zitieren

APA

Anh, T. T., Viet, H. H., Hoang, Q. N., Bich, T. T. T., & Bao, V. T. (2026). Comparative flexural performance of primitive, diamond, and gyroid TPMS concrete beams. Transport and Communications Science Journal, 77(9), 1170-1184. https://doi.org/10.47869/tcsj.77.9.4

Vancouver

Anh TT, Viet HH, Hoang QN, Bich TTT, Bao VT. Comparative flexural performance of primitive, diamond, and gyroid TPMS concrete beams. Transport and Communications Science Journal. 2026;77(9):1170-1184. doi:10.47869/tcsj.77.9.4

BibTeX
@article{Anh2026,
  author = {Anh, Tuan Tran and Viet, Hai Hoang and Hoang, Quan Nguyen and Bich, Thao Tran Thi and Bao, Viet Tran},
  title = {Comparative flexural performance of primitive, diamond, and gyroid TPMS concrete beams},
  journal = {Transport and Communications Science Journal},
  year = {2026},
  volume = {77},
  number = {9},
  pages = {1170--1184},
  doi = {10.47869/tcsj.77.9.4}
}
Kostenlos starten →