EUVIMEDEUVIMED entdecken
Crossref

Physical and mechanical properties of an industrial by-product-based water-retaining grout for semi-flexible pavements

Đạt Nguyễn Viết, Anh Bùi Tuấn, Hợi Trần Danh, Phúc Nguyễn Quang

Transport and Communications Science Journal · 10.08.2026 · 77 (8) · 1054-1068

DOI: 10.47869/tcsj.77.8.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 10.08.2026. Verfasst von Đạt Nguyễn Viết und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semi-flexible pavement (SFP) has been investigated as a water-retaining pavement to mitigate the urban heat island effect. The CJJ/T 206-2013 specification defines water-retaining grouts composed of slag powder, fly ash, hydrated lime and water, but the effect of the water-to-slag powder ratio (W/SP) on grout properties has not been quantified. This study evaluates the physical and mechanical properties of a water-retaining grout composed of ground granulated blast-furnace slag, fly ash and hydrated lime, in which the water-to-slag powder ratio (W/SP = 0.66-1.00) was varied as the main design parameter while fly ash and hydrated lime were fixed at 4 % and 8 %, respectively. Flow time and water absorption of four mix ratios (TL1-TL4) were determined according to CJJ/T 206-2013, and flexural and compressive strengths according to TCVN 3121-11:2022 at 7, 14, 21 and 28 days. Increasing W/SP reduced the flow time and increased water absorption almost linearly, while both strengths increased with age but decreased with W/SP. Empirical equations relating water absorption to 7-day strengths are valid only within the tested range. Among the four mixtures, only TL3 (W/SP = 0.87) and TL4 (W/SP = 1.00) satisfy the flow-time and strength requirements of CJJ/T 206-2013, whereas none reaches the 7-day water absorption of 30 % specified in the code (maximum 27.89 %). TL3 is recommended when mechanical strength is prioritized, while TL4 has the highest water absorption among the mixtures meeting the flow-time requirement. Water retention over time and cooling performance were not evaluated.

Zitieren

APA

Viết, Đ. N., Tuấn, A. B., Danh, H. T., & Quang, P. N. (2026). Physical and mechanical properties of an industrial by-product-based water-retaining grout for semi-flexible pavements. Transport and Communications Science Journal, 77(8), 1054-1068. https://doi.org/10.47869/tcsj.77.8.3

Vancouver

Viết ĐN, Tuấn AB, Danh HT, Quang PN. Physical and mechanical properties of an industrial by-product-based water-retaining grout for semi-flexible pavements. Transport and Communications Science Journal. 2026;77(8):1054-1068. doi:10.47869/tcsj.77.8.3

BibTeX
@article{Vit2026,
  author = {Viết, Đạt Nguyễn and Tuấn, Anh Bùi and Danh, Hợi Trần and Quang, Phúc Nguyễn},
  title = {Physical and mechanical properties of an industrial by-product-based water-retaining grout for semi-flexible pavements},
  journal = {Transport and Communications Science Journal},
  year = {2026},
  volume = {77},
  number = {8},
  pages = {1054--1068},
  doi = {10.47869/tcsj.77.8.3}
}
Kostenlos starten →