EUVIMEDEUVIMED entdecken
Crossref

An experimental study on the lateral–torsional buckling behavior of steel beams with initial geometric imperfections

Thi Đoàn Tấn, Huy Nguyễn Xuân, Phê Phạm Văn

Transport and Communications Science Journal · 05.03.2026 · 77 (5) · 687-699

DOI: 10.47869/tcsj.77.5.6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 05.03.2026. Verfasst von Thi Đoàn Tấn und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lateral–torsional buckling is an important instability mode of steel I-beams subjected to bending, in which initial geometric imperfections may significantly influence the stiffness and resistance of the member. However, experimental data regarding the influence of such geometric imperfections on the lateral–torsional buckling behavior of steel beams remain limited. This study presents experimental results to clarify the effect of initial geometric imperfections on the lateral–torsional buckling behavior of hot-rolled I-section steel beams subjected to four-point bending. Three doubly symmetric beams were tested, and the initial out-of-straightness of each beam was measured prior to testing and considered in the interpretation of the results. The load–displacement relationship, the development of coupled lateral displacement and twist at midspan, and the buckling load of beams with initial geometric imperfections were determined and evaluated. Experimental observations indicate that variations in both the distribution pattern and amplitude of the measured initial imperfections alter the progression of coupled lateral displacement and twist, leading to noticeable differences in the ultimate lateral–torsional stability of the tested beams. The experimental database obtained from this study provides a reliable basis for the calibration and validation of finite element models, thereby improving the accuracy and reliability of predicting the lateral–torsional buckling resistance of steel beams accounting for initial geometric imperfections

Zitieren

APA

Tấn, T. Đ., Xuân, H. N., & Văn, P. P. (2026). An experimental study on the lateral–torsional buckling behavior of steel beams with initial geometric imperfections. Transport and Communications Science Journal, 77(5), 687-699. https://doi.org/10.47869/tcsj.77.5.6

Vancouver

Tấn TĐ, Xuân HN, Văn PP. An experimental study on the lateral–torsional buckling behavior of steel beams with initial geometric imperfections. Transport and Communications Science Journal. 2026;77(5):687-699. doi:10.47869/tcsj.77.5.6

BibTeX
@article{Tn2026,
  author = {Tấn, Thi Đoàn and Xuân, Huy Nguyễn and Văn, Phê Phạm},
  title = {An experimental study on the lateral–torsional buckling behavior of steel beams with initial geometric imperfections},
  journal = {Transport and Communications Science Journal},
  year = {2026},
  volume = {77},
  number = {5},
  pages = {687--699},
  doi = {10.47869/tcsj.77.5.6}
}
Kostenlos starten →