EUVIMEDEUVIMED entdecken
Crossref

Creep–recovery characteristics of modified asphalt binder using tough flex–R additive

Hợi Trần Danh, Hà Trần Thị Cẩm, Tuấn Nguyễn Quang

Transport and Communications Science Journal · 13.03.2026 · 77 (5) · 645-658

DOI: 10.47869/tcsj.77.5.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 13.03.2026. Verfasst von Hợi Trần Danh und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wheel rutting and cracking induced by high temperatures and traffic loading are among the most common forms of distress that reduce the service life of flexible pavements. Therefore, the development of asphalt modifiers capable of enhancing deformation resistance and elastic recovery is of significant importance for advancing durable and sustainable pavement materials. This study evaluates the creep–recovery behavior of a 60/70 penetration grade asphalt binder modified with Tough Flex-R (TFR) and compares its performance with that of a polymer-modified binder (PMB III) using the Multiple Stress Creep Recovery (MSCR) test. Short-term aged binder samples prepared using the Rolling Thin Film Oven (RTFO) were tested at various temperatures under two stress levels of 0,1 kPa and 3,2 kPa to determine the non-recoverable creep compliance (Jnr) and percent recovery (R). The results indicate that increasing temperature and stress level led to higher Jnr values and lower R values for all binders, reflecting reduced elastic response and increased viscous behavior. Compared with the unmodified 60/70 binder, TFR-modified binders exhibited improved elastic recovery and lower non-recoverable deformation. Among the investigated TFR contents, the 25% content provided the best overall performance, characterized by higher R values and lower Jnr values, approaching the behavior of PMB III. The findings demonstrate that TFR is a promising modifier for enhancing rutting resistance and improving the elastic properties of asphalt binders under high-temperature service conditions

Zitieren

APA

Danh, H. T., Cẩm, H. T. T., & Quang, T. N. (2026). Creep–recovery characteristics of modified asphalt binder using tough flex–R additive. Transport and Communications Science Journal, 77(5), 645-658. https://doi.org/10.47869/tcsj.77.5.3

Vancouver

Danh HT, Cẩm HTT, Quang TN. Creep–recovery characteristics of modified asphalt binder using tough flex–R additive. Transport and Communications Science Journal. 2026;77(5):645-658. doi:10.47869/tcsj.77.5.3

BibTeX
@article{Danh2026,
  author = {Danh, Hợi Trần and Cẩm, Hà Trần Thị and Quang, Tuấn Nguyễn},
  title = {Creep–recovery characteristics of modified asphalt binder using tough flex–R additive},
  journal = {Transport and Communications Science Journal},
  year = {2026},
  volume = {77},
  number = {5},
  pages = {645--658},
  doi = {10.47869/tcsj.77.5.3}
}
Kostenlos starten →