EUVIMEDEUVIMED entdecken
Crossref

Effect of inclined stirrups with an angle from 90° to 135º on shear-transfer mechanisms of reinforced concrete beams

Hùng Nguyễn Đình, Thắng Nguyễn Từ, Tiên Nguyễn ĐVT Thủy, Vẹn Phan Lâm, Linh Trần Ngọc

Transport and Communications Science Journal · 28.08.2025 · 77 (2) · 154-165

DOI: 10.47869/tcsj.77.2.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 28.08.2025. Verfasst von Hùng Nguyễn Đình und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stirrups are normally arranged from 45° to 90° to a beam axis to prevent shear crack and improving the shear carrying capacity of the normal reinforced concrete (RC) beams designed horizontally. However, in inclined RC elements, stirrups were arranged parallelly or vertically to the earth surface to be constructed easily. Under uncertain direction load such as earthquake, wind water pressure or collision loads and so on, the angle of stirrup could become larger than 90°. In that case, the contribution of the stirrups on shear carrying capacity can be minimized and the shear transferring mechanism can be changed. This paper presents experimental results on RC beams with the inclined angle of stirrups of 90°, 105°, 125° và 135°. The results showed that all tested beams were failed in shear compression mode. The angle of the critical shear crack in the RC beam with the inclined angle of stirrup greater than 90° was guided by the inclined stirrup. Therefore, the larger the inclined angle of the stirrup is, the smaller the angle of critical shear crack is and the smaller the shear carrying capacity of the beam is. The experimental result also showed that the inclined angle of stirrups should not be larger than 105°.

Zitieren

APA

Đình, H. N., Từ, T. N., Thủy, T. N. Đ., Lâm, V. P., & Ngọc, L. T. (2025). Effect of inclined stirrups with an angle from 90° to 135º on shear-transfer mechanisms of reinforced concrete beams. Transport and Communications Science Journal, 77(2), 154-165. https://doi.org/10.47869/tcsj.77.2.1

Vancouver

Đình HN, Từ TN, Thủy TNĐ, Lâm VP, Ngọc LT. Effect of inclined stirrups with an angle from 90° to 135º on shear-transfer mechanisms of reinforced concrete beams. Transport and Communications Science Journal. 2025;77(2):154-165. doi:10.47869/tcsj.77.2.1

BibTeX
@article{nh2025,
  author = {Đình, Hùng Nguyễn and Từ, Thắng Nguyễn and Thủy, Tiên Nguyễn ĐVT and Lâm, Vẹn Phan and Ngọc, Linh Trần},
  title = {Effect of inclined stirrups with an angle from 90° to 135º on shear-transfer mechanisms of reinforced concrete beams},
  journal = {Transport and Communications Science Journal},
  year = {2025},
  volume = {77},
  number = {2},
  pages = {154--165},
  doi = {10.47869/tcsj.77.2.1}
}
Kostenlos starten →