EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tunable Graphene-Based Wave Absorber: Combined Electrical and Mechanical Tuning

Amir Ali Mohammad Khani, Alireza Barati Haghverdi, Ilghar Rezaei, Seyed Javad Hosseini Zoljalali, Toktam Aghaee

Smart Wearable Technology · 03.07.2025 · 2 · A8

DOI: 10.47852/bonviewswt52025851 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Wearable Technology, online erschienen am 03.07.2025. Verfasst von Amir Ali Mohammad Khani und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Here in this work, a graphene-based absorber in THz waves is introduced. The structure exploits the mechanical adjusting setup using a Micro-Electro-Mechanical Systems comb driver. In addition, the periodic graphene rings and disks are used on top of the TOPAS (cyclic olefin copolymer) spacer. The middle layer spacer is considered as an air gap that can be filled by any target samples. The mechanical tuning besides the influence of the chemical potential makes the proposed structure most tunable with more than five absorption peaks in the THz gap. Two parallel simulation paths are followed in this work. First, an equivalent circuit model representation is developed, and the absorption response is obtained by leveraging the impedance matching theorem. Then the full-wave numerical modeling via the finite element method is performed to investigate the first approach’s validity and accuracy. It is shown that combining electrical and mechanical stimulations can change the number of absorption peaks and also their frequencies. According to the simulation results, the proposed absorber is highly reliable and robust against probable geometrical mismatches, while almost all of the THz spectrum is covered by the proposed structure. Received: 5 April 2025 | Revised: 9 June 2025 | Accepted: 12 June 2025 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data are available from the corresponding author upon reasonable request. Author Contribution Statement Amir Ali Mohammad Khani: Software, Resources. Alireza Barati Haghverdi: Methodology, Formal analysis. Ilghar Rezaei: Validation, Investigation. Seyed Javad Hosseini Zoljalali: Conceptualization, Data curation, Visualization. Toktam Aghaee: Writing – original draft, Writing – review & editing, Supervision, Project administration.

Zitieren

APA

Khani, A. A. M., Haghverdi, A. B., Rezaei, I., Zoljalali, S. J. H., & Aghaee, T. (2025). Tunable Graphene-Based Wave Absorber: Combined Electrical and Mechanical Tuning. Smart Wearable Technology, 2, A8. https://doi.org/10.47852/bonviewswt52025851

Vancouver

Khani AAM, Haghverdi AB, Rezaei I, Zoljalali SJH, Aghaee T. Tunable Graphene-Based Wave Absorber: Combined Electrical and Mechanical Tuning. Smart Wearable Technology. 2025;2:A8. doi:10.47852/bonviewswt52025851

BibTeX
@article{Khani2025,
  author = {Khani, Amir Ali Mohammad and Haghverdi, Alireza Barati and Rezaei, Ilghar and Zoljalali, Seyed Javad Hosseini and Aghaee, Toktam},
  title = {Tunable Graphene-Based Wave Absorber: Combined Electrical and Mechanical Tuning},
  journal = {Smart Wearable Technology},
  year = {2025},
  volume = {2},
  pages = {A8},
  doi = {10.47852/bonviewswt52025851}
}
Kostenlos starten →