EUVIMEDEUVIMED entdecken
Crossref

Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction

Abubakar Abdullahi Garbati, Muhammed Awwal Imran, Caleb Chisom Chike, Emmanuel Nwaka Nwaka, Ugochukwu Chibuzo Akomah, Ihechimere Jael Ogueri, Samuel Oluwasijibomi Olaremi, Akinsanmi S. Ige, Amaku Marcellinus Chukwuebuka, Christopher Olayinka Osasona, Uzoma Eucharia Ibeanu

Archives of Advanced Engineering Science · 2024

DOI: 10.47852/aaes42024198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Advanced Engineering Science, 2024. Verfasst von Abubakar Abdullahi Garbati und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing accumulation of plastic waste poses significant environmental challenges, contributing to pollution and resource depletion. The construction industry, traditionally reliant on non-renewable materials, faces increasing pressure to adopt sustainable practices. This study addresses the urgent need for innovative solutions that utilize recycled plastics in construction, thereby mitigating waste and enhancing material sustainability. This study aims to address the problem of plastic waste management by evaluating the production of interlocking bricks from waste polyethylene terephthalate (PET) and low-density polyethylene (LDPE) plastic. The objectives include assessing the mechanical properties, structural integrity, and durability of these polymeric bricks as sustainable alternatives to traditional building materials. Given the high rates of plastic waste generation and the reliance on natural raw materials for brick production, this research seeks to explore innovative solutions that utilize recycled materials effectively. A systematic methodology was employed to design the mixtures, focusing on varying the sand-to-polymeric waste ratios. Compressive and flexural strength tests were conducted to assess the bricks' ability to withstand vertical loads and bending forces, respectively. Water absorption and density tests were performed to determine durability and suitability for external use. Results indicated that the 70:30 PET to sand mix ratio provided the best performance, with an average compressive strength of 7.86 MPa and flexural strength of 21.94 MPa. The findings suggest that using PET plastic waste in interlocking brick production can enhance material properties while contributing to environmental sustainability.

Zitieren

APA

Garbati, A. A., Imran, M. A., Chike, C. C., Nwaka, E. N., Akomah, U. C., Ogueri, I. J., Olaremi, S. O., Ige, A. S., Chukwuebuka, A. M., Osasona, C. O., & Ibeanu, U. E. (2024). Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction. Archives of Advanced Engineering Science. https://doi.org/10.47852/aaes42024198

Vancouver

Garbati AA, Imran MA, Chike CC, Nwaka EN, Akomah UC, Ogueri IJ, et al. Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction. Archives of Advanced Engineering Science. 2024. doi:10.47852/aaes42024198

BibTeX
@article{Garbati2024,
  author = {Garbati, Abubakar Abdullahi and Imran, Muhammed Awwal and Chike, Caleb Chisom and Nwaka, Emmanuel Nwaka and Akomah, Ugochukwu Chibuzo and Ogueri, Ihechimere Jael and Olaremi, Samuel Oluwasijibomi and Ige, Akinsanmi S. and Chukwuebuka, Amaku Marcellinus and Osasona, Christopher Olayinka and Ibeanu, Uzoma Eucharia},
  title = {Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction},
  journal = {Archives of Advanced Engineering Science},
  year = {2024},
  doi = {10.47852/aaes42024198}
}
Kostenlos starten →